Product Manual

5 PENTAIR HOME SUMP CONTROLLER HOMEOWNER'S GUIDE
1. Unplugyourexistingsumppumpfromwalloutlet.
2. Plugyourpump’scordintothetopoutletofthe
Sump Controller.
3. Plug the Piggyback Switch into the bottom outlet
oftheSumpController.
4. PlugthePseudoPlugintothebackofthe
piggyback switch
5. Plugtheincludedreedfloatswitchwiresinto
thesideoftheSumpController.
6. Plug the Sump Controller into the wall outlet.
7. Secure the High Level Switch to the discharge
pipe with a cable tie. It should be located near
thetopofthesumppit.
Pump
Pseudo
Plug
Float
Switch
INSTALL THE SUMP CONTROLLER