Product Manual

11 PENTAIR HOME SUMP CONTROLLER HOMEOWNER'S GUIDE
CONTROLLER MODES
The Sump Controller has several operational
modesthateffecthowtheunitfunctions.
These include:
AUTO:Thisisthedefaultoperationalmodeof
the Sump Controller. In Auto mode, the pump
will operate either by Float Switch or by User
Button.

IfthepumpisturnedonbytheFloat
Switch,thenitisautomaticallyturnedoff
only by the Float Switch.

IfthepumpisturnedonbytheUser
Button,thenitisonlyturnedoffbythe
User Button.
MANUAL: When in Manual mode, the pump
is not operated by either the Float Switch or
UserButton.Itiscontrolledbyuser-dened
durationandfrequency.Thesearesetand
updated through the App.
TIMER: In Timer mode, the pump will turn on
andrunforthetimedurationsetintheApp.
ItwillautomaticallyreturntoAutomodeafter
the timer expires.
SERVICE: While in Service mode, it cannot
be controlled via the App. The pump can be
turnedonandoffwiththemodebutton.
Additionally, pressing the mode button on
thefrontoftheunitallowstoownertodothe
followingactions:
Action Button Press
Turn pump on/off 1 time quickly
Clear Faults / Silence Buzzer 2 times quickly
Perform Health Test 3 times quickly
Turn on Bluetooth®
wireless technology Pairing
Push and hold for
4 to 15 sec
Enter Service Mode
Push and hold for
25 to 40 sec
Factory Reset
Power ON + Push
and hold for 4 to 10 sec
Status Light Description
Solid Green The unit is connected to the internet and the pump is off.
Blinking Green The unit is running.
Blinking Blue The unit is ready for Bluetooth pairing.
Solid Blue The unit is paired with a mobile device for provisioning.
Solid Red
The unit has faulted and the pump is NOT ABLE TO RUN.
Check app for details.
Blinking Red
The unit has faulted and the pump is able to run.
Check app for details.
Alternating Green & Red
The unit is oine and not connected to WiFi.
The pump is able to run.
Alternating Green & Blue
The unit is connected to WiFi but not the Internet.
The pump is able to run.
Alternating Blue & Red
Health Test is running.
Test OK = blink green. Test Fail = blink red.
Alternating Green, Red & Blue
A rmware update is in progress
or the unit is in Service Mode.
CONTROLLER INDICATIONS