Technical Specifications

23
22
sewage
PUMP SYSTEM
Economical sewage pump system manufactured of durable thermoplastic construction.
Ideal for basement installations, pumping below-grade toilets, and laundry facilities.
sewage/effluent
PUMP ACCESSORIES
FPW73-15
18" x 30",
30 gallon sewage basin only
FPW73-17
Sewage basin cover kit for
FPW73-15 (includes seal kit)
PW198-3
Seal kit only for FPW73-17
and FPW73-18
FPW73-16
24" x 36",
72 gallon sewage basin only
FPW73-18
Sewage basin cover kit for
FPW73-16 (Includes seal kit)
FP212-257
2" economy sewage check valve
FPW212-4
2" heavy duty sewage
check valve
Performance - Gallons per Hour Maximum
Warranty Minimum at Discharge Head in Feet Lift
(years) Model HP Switch Sump Diameter 0' 5' 10' 15' 20' (no flow)
1 FP400C 4/10 Float 18" 5250 3900 2550 960 – 18 ft.
FP400C
1 year warranty
• Includes FPSE3200A pump, 30 gallon basin and lid assembly,
2" check valve and automatic float switch.
• Handles up to 2" solids
• Maximum pumping capacity up to 5250 gallons per hour
• Multi-vane, non-clog vortex impeller
• 8' power cord
• Corrosion-resistant construction
• Grommets accept 4" PVC inlet, 2" PVC discharge and vent
PERFORMANCE INFORMATION
FEATURES
• Superior performance at depths to water of 20' or less
• Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
• Heavy-duty motor
•
Ready-to-install 230 Volt motor
– see manual for 115 Volt conversion
• Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
•
Fully serviceable unit
• TC2104 pressure gauge recommended
FP5182 2 HP
BEST 1 year warranty
FP5172 1-1/2 HP
BEST 1 year warranty
FP5162 1 HP
Better 1 year warranty
Required:
Check Valve or Foot Valve – see page 26
Optional:
Pressure Gauge – TC2104
(sold separately, see page 26)
Required:
Check Valve or Foot Valve – see page 26
Optional:
Pressure Gauge – TC2104
Distance
NPT of Pump
Motor Pipe Size Above
Discharge Pressure PSI (Pounds per Square Inch)
Rating Model HP Voltage Suction Discharge Water
10 15 20 25 30 35 40 45 50
BEST FP5182 2 115/230 2" 2"
5 ft. 69 64 59 53 47 40 34 24 14
10 ft. 67 62 56 50 45 38 30 18 7
15 ft. 65 60 54 48 42 35 27 13 –
20 ft. 62 57 52 46 40 32 23 10 –
BEST FP5172 1-1/2 115/230 1-1/2" 1-1/2"
5 ft. 67 66 61 55 48 39 33 18 –
10 ft. 61 58 56 52 45 37 27 14 –
15 ft. 56 55 54 51 44 34 20 8 –
20 ft. 46 45 44 43 37 28 11 – –
Better FP5162 1 115/230 1-1/2" 1-1/2"
5 ft. 55 51 45 38 31 23 17 – –
10 ft. 49 46 42 35 28 19 13 – –
15 ft. 48 45 39 32 24 16 8 – –
20 ft. 45 44 37 29 20 11 – – –
*All performances shown in gallons per minute.
Corrosion-resistant, self-priming sprinkler pumps are constructed of rugged, heavy-duty
fiberglass-reinforced thermoplastic. Capable of operating up to 30 sprinkler heads. Self-priming
design permits use on automatic sprinkling systems and also for de-watering and water transfer.