Technical Specifications
29
Corrosion-resistant, shallow well jet pumps are ideal for wells with pumping levels of 25' or less.
Self-priming after the pump housing is initially filled with water and feature dual voltage motors.
28
multi-stage
BOOSTER PUMP
Multi-Stage High Pressure Booster pumps provide strong performance with superior pressure,
for increasing water pressure from city mains or private water systems. Designed with our
patented SignaSeal
™
wear system making this pump the most durable pump available,
offering superior ”dead-head“ resistance.
pitcher
PUMP
Cast iron pitcher pump is built tough for long term duty. Ideal for shallow well applications with maxi-
mum depths to water of 25'. Serves water where electricity is not available and is a practical and
decorative addition to any landscape project.
FEATURES
•
Superior “dead-head” resistance
• Strong pump performance
• 10.5 gpm at 130 PSI (1 HP)
• 190 PSI shut-off pressure (1 HP)
• Long life motor
– Stainless steel pump/motor shaft
– Heavy-duty ball bearings
– On-board thermal overload protection
– Rated for continuous duty
• Heavy-duty cast iron pump adapter and discharge
• 3/4" suction and discharge
FP5732
1 HP
1 year warranty
FP5722
3/4 HP
1 year warranty
FP5712
1/2 HP
1 year warranty
Gallons per minute
Warranty
pumped at discharge pressure
Maximum
(years) Model HP 50' 70' 90' 110' 130' PSI
1 FP5732 1 - - 13 12 10.5 190
1 FP5722 3/4 - 13 10 8 - 150
1 FP5712 1/2 13 11 7 - - 110
PERFORMANCE INFORMATION
FPHP25
90 day warranty
• Constructed of heavy duty cast iron
• Designed for shallow well or drive point applications for depths to water of 25' or less
• Features adjustable cap for optional handle positions
• Pitcher spout designed to hold pail for easy operation
• Ready to install with 1-1/4" pipe
• Can be adapted to fit 1" pipe
Gallons per Minute Pumped at
Warranty Pressure Switch Different Depths to Water
*
Pressure
Rating (years) Model HP On Off 5' 10' 15' 20' 25' Shut-Off
BEST 1 FP4032 1 30 50 16.4 16.1 14.1 12.0 8.1 67 PSI
BEST 1 FP4022 3/4 30 50 10.3 9.7 8.2 7.1 5.1 78 PSI
Better 1 FP4012 1/2 30 50 7.4 6.4 6.1 5.1 4.0 77 PSI
*All performances shown in gallons per minute at 40 PSI (pounds per square inch) discharge pressure.
FEATURES
•
Superior performance at depths to water of 25' or less
•
Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
•
Heavy-duty motor
•
Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
•
Pressure switch pre-wired with 30-50 PSI pressure setting
•
1-1/4" NPT suction and 3/4" NPT discharge pipe sizes
•
Serviceable unit
FP4032
1 HP
BEST
1 year warranty
•
Capacities up to 16 gallons per minute at 40 PSI (Average household use 6-10 gpm)
•
Ready-to-install 230 Volt motor – see manual for 115 Volt conversion
FP4022
3/4 HP
BEST
1 year warranty
•
Capacities up to 15 gallons per minute at 40 PSI (Average household use 6-10 gpm
•
Ready-to-install 230 Volt motor – see manual for 115 Volt conversion
FP4012
1/2 HP
Better
1 year warranty
•
Capacities up to 10 gallons per minute at 40 PSI (Average household use 6-10 gpm)
•
Ready-to-install 115 Volt motor
Distance in Feet (Meters) from Motor to Supply
0 - 100 101 - 200 201 - 300 301 - 400 401 - 500
Max. Branch Fuse
(0 - 30) (31 - 61) (62 - 91) (92 - 122) (123 - 152)
HP Volts Load Amp Rating Amp AWG Wire Size (mm
2
)
1 115/230 14.8/7.4 20/15 12/14 (3/2) 8/14 (8.4/2) 6/14 (14/2) 6/12 (4/3) 4/10 (12/5.5)
3/4 115/230 12.2/6.1 20/15 12/14 (3/2) 10/14 (5.5/2) 8/14 (8.4/2) 6/12 (14/3) 6/12 (14/3)
1/2 115 9.4/4.7 15/15 14/14 (2/2) 10/14 (5.5/2) 10/14 (5.5/2) 6/14 (14/2) 6/12 (14/3)
(sold separately, see page 45)
Required:
Check Valve or Foot Valve
– see page 45
Pressure Relief Valve
– TC21603
Optional:
Pressure Gauge
– TC2104
Low Pressure Cut-Off
– FP217-1140
RECOMMENDED TANK:
42 gallons or larger
– see tank section
for model selection on page 46