Installation Guide

Page 16 of 36 versatile™ 4C Installation Manual -- 206362 -- Rev A
www.orencemailboxes.com
TRASH/RECYCLING BIN MODULE INSTALLATION
1 .
Determine which master access lock your module includes before proceeding:
• If the module has a keyed master access lock, insert the key to open the entire front of
the module to gain access to the mounting frame. (The key will be taped to the side of
the module).
• If the module has a combination master access lock, arrange the dials to the proper
combination to open the entire front of the module to gain access to the mounting
frame. (The combination will be shown on a removable label on the front of the
module or the lock will be left in the open position.)
• If the module has a slotted keyless master access lock, insert a slotted screwdriver or
coin (quarter) to open the entire front of the module to gain access to the mounting
frame.
2 .
Place the trash/recycling bin module in the opening until the integrated trim is flush with the
wall board.
3 .
Refer to “Individual Installation” (p. 20) or “Multiple Installation” (p. 22), as appropriate,
and proceed with installation.
IMPORTANT: When installation is complete, make
sure you have removed all hardware located
inside the module before closing the door(s).
versatile™ 4C mailbox suites
NOTE: Trash/recycling bin modules do not require USPS service.