Installation Guide

Page 20 of 36 versatile™ 4C Installation Manual -- 206362 -- Rev A
www.orencemailboxes.com
INDIVIDUAL INSTALLATION (cont.)
versatile™ 4C mailbox suites
2 .
For Single-Wide Florence 4C Modules:
A. Open the master door until the hold open arm engages
• Collection Box module:
Remove the tape that secured the hopper for shipping, allowing the hopper to
drop down out of the way to gain access to the mounting screw locations.
B. Install the included #8 x 2” pan-head T20 Torx wood screws (64225) along both the
left- and right-hand outer frame.
C. With the master door open and hold open arm engaged, install the included #8 x 2”
pan-head T20 Torx wood screws (64225) along the top and bottom frame.
1). Parcel-only module -- Return to p. 12, Step 6 to complete the installation.
2). Collection box module -- Go to p. 32 to install the hopper door handle.
NOTE: The #8 x 2” pan-head T20 Torx wood screws (64225) should
be tightened to ensure a snug fit.
• Overtightening beyond initial contact with frame could
hinder functionality.
• If overtightening occurs, simply back out each
overtightened mounting screw.