Installation Guide

www.orencemailboxes.com
versatile™ 4C Installation Manual -- 206362 -- Rev A
Page 7 of 36
McGard Screwdriver (Part #110116) is available only to USPS personnel and can be obtained
from the USPS Mail Equipment Shop by faxing an “off catalog” request to:
USPS MAIL EQUIPMENT SHOP
FAX NO. [phone] Questions? Call [phone]
McGard Screwdriver (Part #110050) may also be used and is available only to USPS
personnel through eBuy. Part #110050 is not magnetic and does not include a guidance
shroud.
NOTE:
For USPS applications:
A. Arrow lock is installed by USPS personnel only. Contact your local Post Office to
arrange access through the Arrow lock if service is necessary.
For Non-USPS applications:
A. Please disregard instructions related to the Arrow lock throughout this manual.
B. The master access door and parcel door private lock mechanisms were installed at
the factory so the property owner may need to be contacted prior to servicing the
unit.
C. McGard Screwdriver and fasteners are not necessary for Non-USPS (private
delivery) applications.
IMPORTANT NOTICE FOR USPS INSTALLERS
USPS personnel must have a McGard Screwdriver to install and service
the Arrow lock cover on the Florence versatile™ 4C mailbox suites.
Note: Florence Manufacturing does not provide or sell the McGard Screwdriver.
REQUIRED TOOLS
versatile™ 4C mailbox suites
• Cordless driver/drill
• 3/8” Drill bit
• 3/8” Socket wrench or nut driver
• Phillips screwdriver
• Flat blade screwdriver
• T20 Torx bit & bit tip holder
• 151P Torx+ screwdriver / bit