Installation Guide

Page 6 of 36 versatile™ 4C Installation Manual -- 206362 -- Rev A
www.orencemailboxes.com
SUGGESTIONS FOR INDIVIDUAL INSTALLATION
WALL CONSTRUCTION
versatile™ 4C mailbox suites
TM
FINISHED FLOOR
R.O.
HEIGHT
TYPICAL
SINGLE
COLUMN
UNIT
OPENING
SHOWN
R.O.
WIDTH
TYPICAL
DOUBLE
COLUMN
UNIT
OPENING
SHOWN
WALL BOARD
HEIGHT ABOVE
FINISHED FLOOR
(AFF)
17” MINIMUM
R.O.
WIDTH
1 2
3
1
NOTE: All wall frame mounting options are shown for reference
only. Refer to local building codes and accessibility
regulations to determine proper mounting requirements.
1 .
Wall mounting should consist of a lamination of two wood 2”x4” studs on the outer sides of
the modules.
2 .
Florence versatile™ 4C mailbox suites feature trim designed to abut one another (no gap
between modules) when a single stud is used between modules. (A Florence Multi-Unit
Connector Kit can be used instead of the single stud between modules.)
3 .
The mounting wall must have a minimum depth of 17” to allow for recessed mounting of
the Florence versatile™ 4C module
4 .
Squareness and quality of wall mount opening is critical to obtain a secure and properly
functioning Florence versatile™ 4C module.