Installation Guide
Page 28 of 36 versatile™ 4C Installation Manual -- 206362 -- Rev A
www.orencemailboxes.com
1 .
Insert the Arrow lock into the Arrow lock bolster bracket (64782).
2 .
With the collection door open, slide the Arrow lock bolster bracket (64782) with the Arrow
lock onto the collection door bolts.
3 .
Install the lock support plate (92303) as oriented in the illustration.
4 .
Install five (5) #10-32 lock nuts (86091).
• The nuts should be tightened to ensure a snug fit.
• Overtightening may keep the Arrow lock from operating correctly.
NOTE: Arrow lock is installed by USPS Postal Service Personnel ONLY.
• Contact your local Post Office to arrange acquisition and installation
of Arrow lock.
NOTE: Private master access lock for private versatile™ 4C mailboxes is
installed at the factory.
• If field installation is required, use the Postal to Private Conversion Kit
(CK25750).
versatile™ 4C mailbox suites
MASTER DOOR ARROW LOCK INSTALLATION
(FRONT-LOADING ONLY)