Installation Guide

Page 26 of 36 versatile™ 4C Installation Manual -- 206362 -- Rev A
www.orencemailboxes.com
MULTIPLE INSTALLATION USING FLORENCE’S EXCLUSIVE
MULTI-UNIT CONNECTOR KIT (cont.)
8 .
Open the master door(s) until the hold open arm engages and install the included #8 x 2”
pan-head T20 Torx wood screws (64225) along the top and bottom frame.
9 .
Repeat steps 4 - 8 for any additional modules that will be mounted to a multi-unit
connector, otherwise proceed to Step 10.
10 .
Install the included #8 x 2” pan-head T20 Torx wood screws (64225) along the left-hand
outer frame.
NOTE: The #8 x 2” pan-head T20 Torx wood screws (64225) should
be tightened to ensure a snug fit.
• However, overtightening beyond initial contact with frame
could hinder functionality.
• If overtightening occurs, simply back out each
overtightened mounting screw.
versatile™ 4C mailbox suites