Use and Care Guide

34 AF PART # 91196 REV BAF PART # 91196 REV B
REPLACEMENT OF MASTER LOADING DOOR
SLIDE MECHANISM
TYPES I, II, III AND IV
PART # DESCRIPTION
86098 1/8” DIA X .328” L POP RIVET SS
91019 SLIDE MECH. FOR TYPE III
91037 WEAR PLATE
91086 SLIDE MECH FOR TYPE I, II
91106 SLIDE MECH. FOR TYPE IV
REQUIRED TOOLS
CORDLESS DRILL
PORTABLE POP RIVET GUN
1/8” DRILL BIT
3/16” DRILL BIT
5/32” HEX BIT/ALLEN WRENCH
OPEN MASTER LOADING DOORS
COMPLETELY REMOVE INSERT ASSEMBLY
(SEE INSTRUCTIONS - PAGE 6)
DRILL OUT TWO (2) 86098 1/8” POP RIV-
ETS AT TOP OF SLIDE MECHANISM AND
REMOVE WEAR PLATE
DRILL OUT TWO (2) 86098 1/8” POP RIV-
ETS NEAR ARROW LATCH AND REMOVE
WEAR PLATE
REMOVE ARROW LATCH HANDLE (SEE
INSTRUCTIONS PAGE 26)
REMOVE THE OLD SLIDE FROM THE TOP
OF THE INSERT ASSEMBLY
1.
2.
3.
REPLACE SLIDE MECHANISM AND RE-
VERSE STEPS 1-6
4.
5.
6.
7.