Installation Instructions

1. PRODUCT NAME
FlorCraft™ Sanded SnapStone™ Porcelain Tile & Fixture Caulk
2. MANUFACTURER
H.B. Fuller Construction Products Inc.
1105 South Frontenac Street
Aurora, IL 60504-6451 U.S.A.
800.832.9002 Customer Support
800.952.2368 Fax
tecspecialty.com
3. DESCRIPTION
FlorCraft™ Sanded SnapStone™ Porcelain Tile & Fixture Caulk forms a tough,
flexible, water and weather-resistant seal on most building materials, protecting
your installation from moisture, drafts and rot. Contains a special silicone additive
to promote greater adhesion and longer life. Dries to a tack free finish in one hour.
Paintable. All white and colored formulations meet ASTM C834 standards for
exterior grade caulks. Suitable for interior and exterior use.
Key Features and Benefits
• Adheres well in most wet-area applications
• Resists stains
• Paintable
• VOC-compliant
Packaging
10.5 fl. oz. cartridge (310 mL)
Coverage
Typically 25 lineal feet/cartridge using a
1
⁄
4
" bead.
Storage
Store in cool, dry location. Do not store open containers.
Shelf Life
Maximum of 18 months from date of manufacture in unopened package.
Limitations
•
1
⁄
2
” (12 mm) wide gap maximum.
• Do not apply at temperatures below 40°F or above 105°F.
• Do not use for applications subject to constant water exposure, standing water
(including horizontal installations subject to standing water), or areas with extreme
high humidity.
Cautions
WARNING: Cancer hazard. Lungs may be damaged by overexposure. KEEP OUT OF
REACH OF CHILDREN. FIRST AID MEASURES: In all cases, seek medical attention if
symptoms develop or persist. EYES: Flush with water for 20 minutes. SKIN: Wash
with soap and water. IF VAPORS INHALED: Remove to fresh air. IF SWALLOWED:
Do not induce vomiting. SEE MSDS FOR ADDITIONAL INFORMATION. WARNING!
This product contains chemicals known to the State of California to cause cancer,
birth defects or reproductive harm. Medical Emergency Phone Number (24 Hours):
1-888-853-1758.
This Product Data Sheet has been prepared in good faith on the basis of information
available at the time of publication. It is intended to provide users with information
about and guidelines for the proper use and application of the covered FlorCraft™
brand product(s) under normal environmental and working conditions. Because each
project is different, H.B. Fuller Construction Products Inc. cannot be responsible for
the consequences of variations in such conditions, or for unforeseen conditions.
4. TECHNICAL DATA
Applicable Standard
Tested in accordance with American Society for Testing and Materials — ASTM C834
FlorCraft™ Sanded SnapStone™ Porcelain Tile & Fixture Caulk
Description ANSI Requirement Typical Results
Extrudability > 2 grams /sec Passes
Low Temperature Flexibility
No cracking through to
substrate or adhesion loss
Passes
Extension
> 75% recovery and
< 25% adhesion loss, with no
cohesive cracking
Passes
Slump < 0.15 inch (3.80 mm) Passes
Staining < Stain Index 3 Passes
Tack Free Time
No material adhering to
plastic strip after 1 hour
Passes
Volume Shrinkage < 30% maximum shrinkage Passes
Greater than: > Greater than or equal to: ≥ Less than: < Less than or equal to: ≤
Physical Properties
Description
Physical State Soft paste
Color 32 pigmented colors
Odor Nil
Open Time [at 72°F (22°C)] 20-30 minutes
Wt./U.S. Gallon 12.0 to 13.5 lbs./gallon
Wt./Liter 1.44 to 1.62 kg / liter
VOC 12 g/L less water (0.6%)
Freeze/Thaw Stability
Freeze/thaw stable. If frozen, simply thaw and use
as directed.
Storage
Store in cool, dry location. The cartridge spout may
be wrapped with plastic tape after opening.
Shelf Life
Maximum 18 months from date of manufacture in
unopened package.
5. INSTALLATION INSTRUCTIONS
Application
1. Surfaces must be dry and clean.
2. Cut nozzle tip to desired bead size.
3. Dispense sealant where needed.
4. Smooth if necessary with wet finger.
5. Remove excess sealant with wet finger or damp cloth before sealant dries.
Immediately wash hands with soap and water afterward.
6. Allow 72 hours for curing.
7. A second coat may be necessary. Wait 24 hours before applying a second coat.
Do not use below 40°F or above 105°F. Not for constant underwater use such
as pools, saunas or steam room. Not for outdoor use. Store away from extreme
heat or cold. Color match is complete when sealant is fully cured. Wet sealant
will appear lighter in color. This product may contain high levels of colorant and
may stain some porous materials such as wallpaper or walboard. Masking of
these areas may be necessary.
Sanded SnapStone
™
Porcelain Tile & Fixture Caulk