Electric Lawn Mower Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device. FSM R1 Electric Lawn Mower Kompernaß GmbH Burgstraße 21 D-44867 Bochum (Germany) Last Information Update: 10 / 2007 · Ident.-No.
1 5 4 2 3 7 8 6 9 10 11 12 16 15 A 14 13 B C 18 19 20 17 D E F 21 22
Table of Content Introduction Intended purpose ......................................................................................................... Page Equipment components FSM R1....................................................................................... Page Items supplied ............................................................................................................... Page Technical Data .....................................................................................
Introduction The following pictogrammes / symbols are used in these operating instructions: Read the operating instructions! Protection category II power tool; double insulated Always heed warning labels and safety instructions! Wear hearing protection, dust protection mask, protective glasses and protective gloves.
Introduction / General safety advice 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Power socket Handle switch Power cable Power cable strain relief Screw connection 2 x Lower shaft handle Grass box with carrying handle Impact protection flap Switch lever for cutting height adjustment Front wheels 2 x Housing with carrying handle and ventilation slits Retaining screw 2 x Rear wheels 2 x Cover for retaining screw 2 x (see Fig. A) (see Fig.
General safety advice 1. Your working area 3. Personal safety a) Keep your working area clean and clutter-free. Untidy or poorly lit working areas can lead to accidents. b) Do not work with the device in potentially explosive environments in which there are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes. c) Keep children and other people away while you are operating the electrical tool.
General safety advice 4. Careful handling and use of electrical tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. b) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired.
General safety advice J Under no circumstances should you use the appliance when it is wet and / or in a moist environment (e.g.
General safety advice /Commissioning J Check before use that the cutting edge is not blunt and that its mounting is not damaged. Replace blunt or damaged cutting tools in a complete set so as not to create a dynamic unbalance. J Check the grass box 10 regularly for signs of wear or deformation. J Regularly check all nuts and screws for their tightness, to ensure a faultless operating condition for the appliance. J Avoid all collisions between the appliance and foreign objects (e.g.
Commissioning /Operation Removal j Raise up the impact protection flap 11 . j Remove the grass box 10 . Q Adjusting the cutting height c Danger! J Switch the appliance off! Wait until the curved blade bar 21 comes to a complete stop! j The appliance permits 6 adjustments of cutting height, from 20 to 70 mm (see Fig. D). Tip! j For the first cut of the season, when the stems have grown to at least 5 to 6 cm, set a high cutting height.
Operation / Maintenance and Cleaning j Take the appliance back into use exclusively when it is undamaged. Q Transporting / storing mower the c Danger! J Switch the appliance off! Wait until the curved blade bar 21 comes to a complete stop. J Separate the appliance from the power source! Transporting j Push the appliance by the steering shaft handle 1 or carry it by the carrying handle on the housing 14 . Storage j Store the appliance in a dry area, protected from non-permitted use.
Troubleshooting / Disposal / Information Q Troubleshooting Q c Danger! J Wear protective work gloves! Fault Cause Cure The appliance doesn’t work. The electrical power supply is defective. Check the connections of the appliance. Arrange for the power supply to be checked over by an electrician. The extension cable or the power cable 6 is damaged. Provide for replacement and / or repair. The fuse and / or the FI protection switch were activated.
Information Q Conformity Declaration / Manufacturer We, Kompernaß GmbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product complies with the requirements of the following EU directives: Machine Guidelines (98 / 37 / EC) EC Low Voltage Regulations (2006 / 95 / EC) EMC (Electromagentic Compatibility) (2004 / 108 / EC) Directive relating to the noise emission in the environment by equipment for use outdoors (2000/14/EC) Product designation: Florabest Electric Lawn Mower FSM R1 Bochum, 31.
