Operation Manual

26
GB
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does not
start
Power is off
Check the socket, cable,
wire and plug and have
any repairs carried out
by an electrician
Defective on/off switch
(
A
12)
Repair by customer
servicesWorn carbon brushes
Defective motor
Grass too long
Set a greater cut height.
Lift the front wheels
slightly by pressing down
on the handle bar (1).
Motor stops Blockage by foreign
object
Remove the foreign
object
Result unsatisfactory or
motor labours
Cut height too low Set a higher cut height
Blade (
I
18) blunt
Have the blade
sharpened or replace it
Blade area blocked Clean the equipment
Blade assembled
incorrectly
Install the blade correctly
Blade fails to turn
Blade blocked by grass Remove the grass
Blade screw (
I
17)loose
Tighten the blade screw
Strange noises, rattling
or vibrations
Blade screw (
I
17)
loose
Tighten the blade screw
Blade damaged Replace the blade