Operation Manual

18
GB
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass box. Addition-
ally, the equipment is height adjustable
to three levels and has smooth-running
wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical
Specications
Electric Lawnmower .. FRM 1200 C3
Motor input power .....................1200 W
Mains voltage .. 220 V-240 V~, 50/60 Hz
Idling speed ........................... 3350min
-1
Blade width ................................. 31 cm
Cut height ................... 20 / 40 / 60 mm
Protection class ................................
II
Protection type ............................... IP 24
Weight ........................... approx. 9.3 kg
Lawn box volume ............................. 30 l
Sound pressure specication (LpA) ...........
...................... 84 dB (A); KpA = 3 dB (A)
Noise level specication
measured (LWA) ....................................
......................93 dB (A); KwA = 3 dB (A)
guaranteed ..........................96.0 dB (A)
Vibration on the handle
(an) ......................................... 1.3 m/s
2
The stated vibration emission value was mea-
sured in accordance with a standard testing
procedure and may be used to compare one
power tool to another.
The stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
General Description
Scope of Delivery
Carefully remove the equipment from the
packaging and check whether the follow-
ing parts are complete:
- Lawnmower and curved handle with
connection cable
- Lower bar
- Lawn box (in three parts)
- 2 screws to attach the bar
- 2 wing nuts and screws for attaching
the curved handle
- 2 holders to attach the
connection cable
- Wheels
- Instruction Manual
Overview
A
1 Curved handle
2 Wing nuts
3 Lower bar
4 Grass box
5 Wheels
6 Lawnmower housing
7 Collision guard
8 Cable holder
9 Power cable outlet
10 Release button
11 Cable strain relief
12 Start lever
B
13 Screws for lower bar
C
14 Screws for curved handle
D
15 Handle
16 upper part of grass box
20 Level gauge
I
17 Blade screw
18 Blade
19 Motor spindle