Operation Manual

40
GB
• Start the engine and allow it to run until
it stops due to running out of petrol.
• Change the oil (see “changing the en-
gine oil “).
• Preserve the engine:
- Unscrew the spark plug (
13) (see
“cleaning and maintenance“);
- Pour a tablespoon of engine oil
through the spark plug hole into the
engine compartment;
- Pull the starter cord (
7) slowly sev-
eral times with the safety catch
(
2) pulled in order to distribute
the oil inside the engine;
- Screw the spark plug (
13) tight.
• Dispose of used oil and petrol residues
in an ecofriendly manner (see “Dis-
posal/environmental protection“).
There is no need to drain the petrol
tank if a fuel stabiliser is added to
the petrol (see “replacement parts”
and Briggs & Stratton instruction
manual).
Disposal/Environmental
Protection
• Return the tool, accessories and pack-
aging to a recycling centre when you
have nished with them.
- Carefully drain the petrol and oil
tanks and take your equipment to
a recycling centre. The plastic and
metal parts that are used can be
separated by type and thus recycled.
- Take used oil and petrol residues to a
disposal point and do not pour them
into the sewer system or down the
drain.
- Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
• Do not throw cut grass in the dustbin
but rather compost it or spread it under
bushes and trees as a mulch layer.