SDS

ManualsBrandsFloors of Distinction ManualsFlooring & RugsRapid Loc® 3/8 x 5 Capitva Hickory Engineered Hardwood Flooring (25.83 sq.ft/ctn)

Safety Data Sheet (SDS)

according to 29CFR 1910.1200 (g)ANSI Z400.1Z129.1-2010

Engineered Wood Flooring

Section 1 IDENTIFICATION:

Trade Names Rapid Loc®, Direct Loc®

Manufacturer’s Information

ZHEJIANG LAYO WOOD INDUSTRY CO., LTD

Manufacturer Address No.1, Dayishu Road, Yuxin Town, Nanhu District, Jiaxing City, Zhejiang

Province, China.

Emergency Phone:

(225) 341-4234

Additional Phone:

(225) 341-4488

Website: www.customsurface.com

Email: info@customsurface.com

Section 2 HAZARDS IDENTIFICATION:

2.1

Emergency Overview:

Appearance/Odor:

Brown lath, light odor.

This product should not present a health hazard when used under reasonable conditions. But if contacted or

inhaled the dust or fragments may cause eyes, skin and respiratory tract irritation.

2.2

OSHA Regulatory Status:

This product is not considered hazardous by the OSHA hazard communication

standard (29 CFR 1910.1200).

2.3

Potential Health Hazards:

Relevant routes of exposure:

See Section 11 for more information.

Medical condition aggravated by exposure:

N/ A.

2.4

Potential Environmental Hazards:

N/ A.

2.5

Carcinogenicity:

See Section 11.

Section 3 COMPOSITION, INFORMATION ON INGREDIENTS:

Summary of content (6 pages)

PAGE 1
Safety Data Sheet (SDS) according to 29CFR 1910.1200 (g)ANSI Z400.1Z129.1-2010 Engineered Wood Flooring Section 1 IDENTIFICATION: Trade Names Manufacturer’s Information: Manufacturer Address Rapid Loc®, Direct Loc® ZHEJIANG LAYO WOOD INDUSTRY CO., LTD No.1, Dayishu Road, Yuxin Town, Nanhu District, Jiaxing City, Zhejiang Province, China. Emergency Phone: Additional Phone: Website: Email: (225) 341-4234 (225) 341-4488 www.customsurface.com info@customsurface.com Section 2 HAZARDS IDENTIFICATION: 2.
PAGE 2
Section 4 FIRST AID MEASURES: 4.1 First aid procedures by route of exposure: Inhalation: If inhaled, remove to fresh air immediately. If breathing is difficult, given oxygen by trained professionals. If not breathing, give artificial respiration. Inhalation of the dust or fragments occurring in machining may cause respiratory tract irritation. Get medical aid immediately if feel unwell.
PAGE 3
7.1 Handling: Ensure good local exhaust ventilation. Handle and open container with care. Keep container closed and away from incompatible substances (see section 10), food, drink and feedstuffs. Avoid contact with eyes. Avoid ingestion and inhalation. The work area should be equipped with the corresponding species and quantity of emergency equipment, spills emergency treatment equipment and appropriate storage material. 7 .2 Storage: Keep container closed when not in use.
PAGE 4
Flash Point: N/ A Relative Density: N/ A Evaporation rate: N/ A Upper/lower flammability or explosive limits: N/ A Vapor Pressure: N/ A Vapor Density {Air=l): N/ A Relative density: N/ A Solubility: N/ A Auto-ignition Temperature: N/ A Decomposition temperature: N/ A Flammability {solid, gas): N/ A Section 10 STABILITY AND REACTIVITY: 10.1 Reactivity: The component materials of the product may react with strong oxidizer, bases, etc .. 10.
PAGE 5
11.7 Neurological effects: No data available. 11.8 Reproductive Cell Mutagenicity: No data available. Reproductive Toxicity: No data available. 11.9 Skin corrosion: No data available. Eye corrosion: No data available. 11.10 Developmental effects: No data available. 11.11 Specific target organ toxicity: Single exposure: No data available. Repeated exposure: No data available. 11.12 Aspiration hazard: No data available. Section 12 12.1 12.2 12.3 12.4 12.
PAGE 6
Section 15 REGULATORY INFORMATION Regulatory Information: Reference to the local, national, US, EU, CA and international regulations. California Prop.GS Components: CAS# 14807-96-6 is listed as carcinogens by CA Prop 65. This product does not contain any chemicals known to cause birth defects, or any other reproductive harm.