Specification
Reliance Detection Technologies, LLC
27 Business Park Drive
Branford, CT 06405
203-488-2684 or 888-771-4929
info@RelianceDetection.com
www.RelianceDetection.com
© 2019 Reliance Detection Technologies, LLC – A Madison Company – All specications are subject to change without notice. RDT_SubmittalSheet_RS-094_012019_RevB
RS-094 TECHNICAL SUBMITTAL DATA SHEET
DIMENSIONS & WEIGHTS:
AVAILABLE ACCESSORIES:
• Wired Sensor Pucks – Up to 5 additional sensors can be wired to a single
RS-094 receiver box for a wider area of leak detection.
• Sensing Rope Kit – Ideal for use with low tanks, or for room perimeter and
sub-oor leak detection applications.
• Auto Dialer – A convenient, low-cost add-on to send and receive automatic alerts
whenever your FloodMaster system identies a fault condition.
RDT recommends that installations be completed by a licensed plumber to ensure that all local code requirements are followed.
Size
Square
A B C D E F G H I L CH M P CV PSI LBS
IN-LBS
1/2” 1.50 1.28 0.35 1.42
(ISO F03)
0.24 0.35 0.08 0.98 1.32 0.59 2.64 1.06 0.22 0.56 18.84 580 0.21 53.10
3/4” 1.50 1.36 0.35 1.42
(ISO F03)
0.24 0.35 0.08 0.98 1.57 0.64 2.99 1.26 0.22 0.75 34.10 580 0.40 53.10
1” 1.50 1.79 0.35 1.42
(ISO F03)
0.24 0.35 0.12 0.98 1.93 0.75 3.54 1.61 0.24 0.95 49.71 580 0.75 53.10
1-1/4” 1.50 1.93 0.35 1.42
(ISO F03)
0.24 0.35 0.12 0.98 2.30 0.84 4.02 1.97 0.24 1.18 102.88 580 1.05 53.10
ORDERING INFORMATION:
Valve Size P/N UPC
1/2” RS-094-1/2 857640005373
3/4” RS-094-3/4 857640005380
1” RS-094-1 857640005397
1-1/4” RS-094-1-1/4 857640005403
OPERATING SPECIFICATIONS:
Valve
Pressure Rating ..........
600 WOG - 150 WSP
Max. Temperature.......366°F
Max. Pressure ............Tested to 80 PSI
Receiver Box / Actuator
Transformer ...............120V AC
Voltage ......................24V AC
Absorbed Current .......0.6 A
Absorbed Power .........15V A
Frequency ..................50/60 Hz
Working Temp. ...........0° to 100°F
Square Drive ............... 0.43
Audible Alarm ............83 dB
MATERIALS:
Valve
Body ...................Low-lead brass
End Connection ...Low-lead brass
Stem ...................Low-lead brass
Ball .................... Low-lead brass (tea
coated)
Ball Seats ............PTFE
O-Rings ............... FKM (Viton
®
)
Receiver Box / Actuator & Sensor
Body ................... High-performance
engineered polymer
CABLE LENGTHS:
Power Cord .........12’
Sensor Cable ....... 8’
(custom lengths avail.)
APPROVALS:
NSF/ANSI 61 and 372 approved valve.
MA Board of Registration of Plumbers
Approval – Code # P1-0515-489.
(IN-LBS) TORQUE VALVES ARE MEASURED IN LABORATORY TESTS UNDER THE FOLLOWING CONDITIONS: TEMPERATURE: 68°F;
PRESSURE: 0 PSI; FLUID: PURIFIED WATER.
Shut-Off Valve
SECTION A-A
A
A
SQUARE
SQUA
RE
L
E
A
M
4X Ø D THRU
CH
Ø H
Ø C
90°
B
NP
T
Ø P
F
I
Ø
G
1234
A
B
SIZE
DWG NO
REV
SCALE
SHEET
OF
DRAWN
TITLE
PROPRIETARY INFORMATION
THE INFORMATION
CONTAINED IN THIS
DOCUMENT IS THE PROPERTY
OF MADISON COMPANY. IT IS
SUBJECT TO RETURN UPON
DEMAND AND MAY NOT BE
REPRODUCED OR
OTHERWISE DISCLOSED
WITHOUT WRITTEN
PERMISSION FROM MADISON
COMPANY.
UNLESS OTHERWISE
SPECIFIED DIMENSIONS ARE
IN INCHES
TOLERANCES
FRACTIONS: ±1/64
ANGLES: 1°
DRAFT ANGLE: 1/2°
XXX: ±.005 XX: ±.01
X: ±.
1
DRAWING INTERPRETED
PER ANSI Y 14.5
CODE IDENT NO.
21603
NONE
RS- 094 LEAK DETECTION SYSTEM
RS-094 Assmebly
3
4
A
B
MADISON COMPANY
27 Business Park Drive, Branford, CT 06405
SFM 6/25/2018
3.0
"UNIVERSAL SENSOR PUCK"
8 FT LEAD
Ø 3.0
Water Sensor Receiver Box / Actuator
3.0
3.1
4.9
1.5
1.4
2.
5
.4
1.4
1.1 1.350