Product Brochure

24
TECHNICAL SUBMITTAL DATA SHEET
HVAC/Air Conditioner Condensate Pan Overow Alarm
Job Name: _____________________________________________
Engineer: ______________________________________________
Contractor: _____________________________________________
Contractor P.O.: ________________________________________
Job Location: ___________________________________________
Engineer Approval: ______________________________________
Contractor Approval: ____________________________________
Representative: _________________________________________
MODEL RS-097
Receiver Box
Power
Supply
NO/C/NC
Dry Contacts
Elevated
Water Sensor
203-488-2684 or 888-771-4929
[e-mail]
www.RelianceDetection.com
TYPICAL INSTALLATIONS
INCLUDE:
• Air conditioners and HVAC systems
• Water chillers (roof-top or inside the
structure)
HIGHLY RECOMMENDED FOR:
• Multi-residential complexes
• Commercial oce buildings
• Any facility with a history of insurance
claims for water damage
FEATURES:
• Reusable and testable
• Easy reset button
• Plugs into a standard 120V AC outlet
• Audible alarm (83 dB)
• N/O and N/C dry contacts
• Factory pre-wired
MODIFIED KIT
CONFIGURATIONS:
RS-097-MK6 Plenum-Rated Kit (see pg. 8) –
Features plenum-rated wires and step-
down transformer (120, 208, 240V AC to
24V AC) with mounting plate in lieu of
standard wall wart. Ideal for monitoring
HVAC equipment and chillers installed in
hidden plenum spaces. Please see the
RS-097-MK6 installation manual for
detailed installation instructions.
APPLICATION CONSIDERATIONS:
The RS-097 system is designed to prevent water damage caused by overowing air
conditioning, HVAC, HVACR and water chiller condensate pans. This unit features an
elevated (1/2”) water sensor which will allow for a normal amount of water in the pan
and only activate in a near-overow situation. When too much water accumulates in
the pan, an alarm sounds. An optional signal wire can be wired through an appropriate
relay (not included) to turn off the HVAC unit when the alarm is activated to prevent
further accumulation.
INSTALLATION OVERVIEW:
The receiver box plugs into a standard 120V AC wall outlet. A sensor is placed in the
condensate pan or another area where water is likely to accumulate. Up to 5 additional
sensors can be added for a wider area of leak detection. Components come pre-wired.
The system can be performance tested anytime; it is resettable via reset button on the
receiver box. Optional dry contact connections (NO/C/NC) can also be used for fault
notication to existing security panel or BMS.