Product Brochure

22
TECHNICAL SUBMITTAL DATA SHEET
Water Leak Detection & Alarm System
Job Name: _____________________________________________
Engineer: ______________________________________________
Contractor: _____________________________________________
Contractor P.O.: ________________________________________
Job Location: ___________________________________________
Engineer Approval: ______________________________________
Contractor Approval: ____________________________________
Representative: _________________________________________
MODEL RS-096
Receiver Box
Power
Supply
NO/C/NC
Dry Contacts
Water
Sensor
203-488-2684 or 888-771-4929
[e-mail]
www.RelianceDetection.com
TYPICAL INSTALLATIONS
INCLUDE:
• Drains and pipes that are prone to leaking
or freezing
• Water-fed appliances such as dishwashers,
washing machines and water heaters
• Sump pumps
• Tubs
• Table-top containers and beakers
• Sinks
HIGHLY RECOMMENDED FOR:
• Commercial buildings
• Basements
• Above/near data processing rooms
• Medical facilities and labs
• Any facility with a history of insurance
claims for water damage
FEATURES:
• Reusable and testable
• Easy reset button
• Plugs into a standard 120V AC outlet
• Audible alarm (83 dB)
• N/O and N/C dry contacts
• Factory pre-wired
MODIFIED KIT
CONFIGURATIONS:
RS-096-MK6 Plenum-Rated Kit (see pg. 8) –
Features plenum-rated wires and step-down
transformer (120, 208, 240V AC to 24V AC)
with mounting plate in lieu of standard wall
wart. Please see the RS-096-MK6 installation
manual for detailed installation instructions.
APPLICATION CONSIDERATIONS:
The RS-096 alarm system is designed to detect and notify you of leaks from water-fed
appliances, plumbing xtures and tanks/containers. When the water sensor comes in
contact with just 1/16” of any non-ammable conductive liquid (such as water), an alarm
sounds. Optional dry contact connections (NO/C/NC) can also be used for fault notication
to existing security panel or BMS.
INSTALLATION OVERVIEW:
The receiver box plugs into a standard 120V AC wall outlet. A sensor is placed in an area
where water is likely to accumulate. Up to 5 additional sensors can be added for a wider
area of leak detection. Components come pre-wired.
The system can be performance tested anytime; it is resettable via reset button on the
receiver box.