Product Brochure

20
TECHNICAL SUBMITTAL DATA SHEET
Battery-Powered Water Leak Detection & Alarm System
Job Name: _____________________________________________
Engineer: ______________________________________________
Contractor: _____________________________________________
Contractor P.O.: ________________________________________
Job Location: ___________________________________________
Engineer Approval: ______________________________________
Contractor Approval: ____________________________________
Representative: _________________________________________
MODEL RS-095
Alarm Box
Battery
Compartment
Sensor Cable
( 6’, extendable
to 100’)
Water
Sensor
Unit Dimensions:
4-1/8” High x
3” Wide x
1-1/2” Deep
TYPICAL INSTALLATIONS
INCLUDE:
• Drains and pipes that are prone to leaking
or freezing
• Water-fed appliances such as dishwashers,
washing machines and water heaters
• Sump pumps
• Tubs
• Table-top containers and beakers
• Sinks
HIGHLY RECOMMENDED FOR:
• Commercial buildings
• Basements
• Above/near data processing rooms
• Medical facilities and labs
• Any facility with a history of insurance
claims for water damage
FEATURES:
• Completely self-contained and portable
• Powered by a single 9-volt battery
• Reusable and testable
• Easy reset button
• Loud audible alarm (110 dB)
• A plug-in leak alarm that can
accommodate multiple sensors and
interface with a security system is also
available (model RS-096)
APPLICATION CONSIDERATIONS:
The RS-095 self-contained, battery-powered alarm system is designed to detect and
notify you of leaks and overows from water-fed appliances, plumbing xtures and
tanks/containers. When the integrated water sensor comes in contact with just 1/32”
of any non-ammable conductive liquid (such as water), an alarm sounds.
This fully transportable sensor can be repositioned as your need for an early leak detection
alarm changes. The integrated sensor has a 6’ wire so it can be extended into a sump pit or
mounted on a wall and stretched to another location. Splice up to 100’ of speaker wire into
the line to extend the sensor’s reach even further.
INSTALLATION OVERVIEW:
The receiver box is powered by a single 9V battery (not included). The sensor is located
on the bottom of the alarm box. The alarm can be placed directly on the oor with the
sensor compartment closed, or the sensor compartment can be opened and the sensor
wires extended to reach a sump pit or another remote location where water is likely to
accumulate. The system can be performance tested anytime.
Reliance Detection Technologies, LLC
27 Business Park Drive
Branford, CT 06405
203-488-2684 or 888-771-4929
[e-mail]
www.RelianceDetection.com
© 2018 Reliance Detection Technologies, LLC – A Madison Company – All specications are subject to change without notice. RDT_SubmittalSheet_RS-095_122018_RevA
ORDERING INFORMATION:
Valve Size P/N UPC
N/A RS-095 857640005410