Product Brochure

16
TECHNICAL SUBMITTAL DATA SHEET
Hose-Fed Appliance Leak Detection & Automatic Shut-Off System
Job Name: _____________________________________________
Engineer: ______________________________________________
Contractor: _____________________________________________
Contractor P.O.: ________________________________________
Job Location: ___________________________________________
Engineer Approval: ______________________________________
Contractor Approval: ____________________________________
Representative: _________________________________________
MODEL RS-092
Patent
#6,035,699
Receiver Box /
Actuator
Wall Wart Step-Down Transformer
& Wall Mounting Plate
Shut-Off
Valve
Compression
Fittings
NO/C/NC
Dry Contacts
Wire
Rope
Sensor
203-488-2684 or 888-771-4929
[e-mail]
www.RelianceDetection.com
TYPICAL INSTALLATIONS
INCLUDE:
• Dishwashers, ice makers, and beverage
dispensers
• Commercial break rooms
• Residential water treatment and reverse
osmosis (RO) systems
• Restaurants and food courts
• Common-risk housing – condos
and apartments
• New and retrot construction
HIGHLY RECOMMENDED FOR:
• Commercial oce buildings
• Multi-residential complexes
• Academic, institutional and industrial
facilities
• Any facility with a history of insurance
claims for water damage
FEATURES:
• 1/2” full port valve
• Fittings: (1) 3/8” x 1/2” male compression
and (1) 3/8” x 1/2” female compression
• Choice of standard wall wart or step-down
transformer to power the unit
• Reusable and testable
• Easy reset button
• Snap-t actuator allows for manual
operation of the valve
• Audible alarm (83 dB)
• N/O and N/C dry contacts
• Factory pre-wired
APPLICATION CONSIDERATIONS:
Hose-fed appliance failures can happen at any time, often without warning and hidden
from view. These leaks can cause substantial ooding and property damage if allowed
to run for more than even just a few minutes’ time. The RS-092 system is designed to
minimize water damage when these leaks occur.
INSTALLATION OVERVIEW:
The RS-092 full port valve installs on the hard pipe feed water line between the manual
shut-off and the hose line, using the provided 1/2” NPT x 3/8” ttings. Lay the wire rope
sensor under the appliance or around the area where water from a leak is most likely to
accumulate. When the sensor detects leaking water, an alarm will sound and the valve will
automatically shut off the feed water intake to prevent catastrophic water damage.
The RS-092 is available in two electrical supply congurations: standard 120V AC wall
wart (MK1) or 120, 208 or 240V AC to 24V AC step-down transformer (MK2). Components
come pre-wired. The system can be performance tested anytime; it is resettable via reset
button on actuator. Optional dry contact connections (NO/C/NC) are available for fault
notication to existing security panel or BMS.
Emergency manual operation of the valve is accomplished by removing the snap-t
actuator and manually changing the valve to open or closed. In the event of a power
failure, the valve will remain in position (either open or closed).
MK1 MK2