Product Brochure
11
Reliance Detection Technologies, LLC
27 Business Park Drive
Branford, CT 06405
203-488-2684 or 888-771-4929
info@RelianceDetection.com
www.RelianceDetection.com
© 2018 Reliance Detection Technologies, LLC – A Madison Company – All specications are subject to change without notice. RDT_SubmittalSheet_RS-080_Ball_112018_RevA
RS-080 with 3/4” to 2” Ball Valve TECHNICAL SUBMITTAL DATA SHEET
DIMENSIONS & WEIGHTS:
RDT recommends that installations be completed by a licensed plumber to ensure that all local code requirements are followed.
ORDERING INFORMATION:
OPERATING SPECIFICATIONS:
Ball Valve
Pressure Rating ..........
600 WOG - 150 WSP
Max. Temperature.......366°F
Electric Actuator
Voltage ......................24V AC
Absorbed Current .......1.0 A
Absorbed Power .........24V A
Frequency ..................50/60 Hz
Working Temp. ...........-4° to 131°F
Receiver Box
Audible Alarm ............83 dB
MATERIALS:
Ball Valve
Body ...................Low-lead brass
End Connection ...Low-lead brass
Stem ...................Low-lead brass
Ball .................... Low-lead brass
(tea coated)
Ball Seats ............PTFE
O-Rings ............... FKM (Viton
®
)
CABLE LENGTHS:
Power Cord .........12’
Sensor Cable ....... 8’
(custom lengths avail.)
Valve Cable ......... 8’ (adder lengths avail.)
APPROVALS:
NSF/ANSI 61 and 372 approved valve.
MA Board of Registration of Plumbers
Approval – Code # P3-0818-66.
UL classied actuator.
1234
A
B
SIZE
DWG NO
REV
SCALE
SHEET
OF
DRAWN
TITLE
PROPRIETARY INFORMATION
THE INFORMATION
CONTAINED IN THIS
DOCUMENT IS THE PROPERTY
OF MADISON COMPANY. IT IS
SUBJECT TO RETURN UPON
DEMAND AND MAY NOT BE
REPRODUCED OR
OTHERWISE DISCLOSED
WITHOUT WRITTEN
PERMISSION FROM MADISON
COMPANY.
UNLESS OTHERWISE
SPECIFIED DIMENSIONS ARE
IN INCHES
TOLERANCES
FRACTIONS: ±1/64
ANGLES: 1°
DRAFT ANGLE: 1/2°
XXX: ±.005 XX: ±.01
X: ±.
1
DRAWING INTERPRETED
PER ANSI Y 14.5
CODE IDENT NO.
21603
NONE
RS- 094 LEAK DETECTION SYSTEM
RS-094 Assmebly
3
4
A
B
MADISON COMPANY
27 Business Park Drive, Branford, CT 06405
SFM 6/25/2018
3.0
"UNIVERSAL SENSOR PUCK"
8 FT LEAD
Ø 3.0
Water Sensor
RS-080 Shut-Off Ball Valve Specications: 3/4” through 2”
Size
Square
A B C D E F G H I L CH M P CV PSI LBS
IN-LBS
3/4” 1.50 1.36 0.35 1.42
(ISO F03)
0.24 0.35 0.08 0.98 1.57 0.64 2.99 1.26 0.22 0.75 34.10 580 0.40 53.10
1” 1.50 1.79 0.35 1.42
(ISO F03)
0.24 0.35 0.12 0.98 1.93 0.75 3.54 1.61 0.24 0.95 49.71 580 0.75 53.10
1-1/4” 1.50 1.93 0.35 1.42
(ISO F03)
0.24 0.35 0.12 0.98 2.30 0.84 4.02 1.97 0.24 1.18 102.88 580 1.05 53.10
1-1/2” 1.97 2.52 0.43 1.97
(ISO F05)
0.28 0.43 0.12 1.38 2.87 0.84 4.49 2.17 1.39 1.50 265.88 580 1.73 150.46
2” 1.97 2.88 0.43 1.97
(ISO F05)
0.28 0.43 0.12 1.38 3.60 1.01 5.43 2.76 0.31 1.98 306.34 580 2.98 150.46
(IN-LBS) TORQUE VALVES ARE MEASURED IN LABORATORY TESTS UNDER THE FOLLOWING CONDITIONS: TEMPERATURE: 68°F;
PRESSURE: 0 PSI; FLUID: PURIFIED WATER.
Shut-Off
Ball Valve
(3/4” to 2”)
SECTION A-A
A
A
SQUARE
L
E
A
M
CH
Ø H
90°
B
NPT
F
I
Ø P
Ø C
Ø G
SQUARE
4X Ø D
THRU
Valve Size P/N UPC
3/4” RS-080-3/4 857640005281
1” RS-080-1 857640005298
1-1/4” RS-080-1-1/4 857640005304
1-1/2” RS-080-1-1/2 857640005311
2” RS-080-2 857640005328
1.08
2.61
2.65
.3
3
2.
06
1.17
2.66
AH
P
G
C D
E
B
F
RS-080 Electric Actuator Specications
Size
Drilling
ISO 5211
A B C D E F G H I P
3/4”, 1”, 1-1/4” F03-F05 4.84 5.57 1.67 4.74 4.96 0.61 4.06 1.26 0.55 2.68
1-1/2”, 2” F03-F05 6.18 7.40 2.38 5.12 5.75 1.65 1.30 1.42 0.47 2.68
Receiver Box
Actuator
AVAILABLE ACCESSORIES (see pg. 26):
• Wired Sensor Pucks – Up to 5 additional sensors can be wired to a single RS-080 receiver
box for a wider area of leak detection.
• Sensing Rope Kit – Ideal for use with low tanks, or for room perimeter and sub-oor leak
detection applications.
• Auto Dialer – Receive automatic alerts whenever the RS-080 identies a fault condition.
• Cable Adder – Allows for positioning of the RS-080 receiver up to 100’ further away
from the valve.