Product Brochure

10
TECHNICAL SUBMITTAL DATA SHEET
Leak Detection & Automatic Water Main Shut-Off System
Job Name: _____________________________________________
Engineer: ______________________________________________
Contractor: _____________________________________________
Contractor P.O.: ________________________________________
Job Location: ___________________________________________
Engineer Approval: ______________________________________
Contractor Approval: ____________________________________
Representative: _________________________________________
MODEL RS-080 with 3/4” to 2” Ball Valve
Receiver
Box
Actuator &
Shut-Off Valve
Power
Supply
NO/C/NC
Dry Contacts
Water Sensor
203-488-2684 or 888-771-4929
[e-mail]
www.RelianceDetection.com
TYPICAL INSTALLATIONS
INCLUDE:
• Common-risk housing – condos
and apartments
• Commercial break rooms
• New and retrot construction
• Mechanical rooms
HIGHLY RECOMMENDED FOR:
• Multi-residential complexes
• Commercial oce buildings
• Any facility with a history of insurance
claims for water damage
FEATURES:
• Full-port valves available from
3/4” to 2” dia.; systems with buttery
valves also available from 2-1/2” to 4” dia.
• Reusable and testable
• Easy reset button
• Plugs into a standard 120V AC outlet
• Audible alarm (83 dB)
• Supports multiple water sensors for a
wider area of leak detection
• N/O and N/C dry contacts
• Factory pre-wired
MODIFIED KIT CONFIGURATIONS:
RS-080-MK6 Plenum-Rated Kit (see pg. 8) –
Features plenum-rated wires and step-
down transformer (120, 208, 240V AC to
24V AC) with mounting plate in lieu of
standard wall wart. Ideal for any application
that requires a valve installation on a supply
line up in the plenum, with power and leak
detection sensing in the work space below.
APPLICATION CONSIDERATIONS:
The RS-080 is designed for localized leak detection (one room, one oor, etc.). When a
leak is detected, the unit will sound an alarm and automatically shut off the main water
supply line, preventing extensive water damage.
INSTALLATION OVERVIEW:
The full-port shut-off valve installs on the main water supply line. The receiver box plugs
into a standard 120V AC wall outlet. A sensor is placed in an area where water from a leak
is likely to accumulate. Up to 5 additional sensors can be added for a wider area of leak
detection. Components come pre-wired.
Optional Cable Adder between the receiver and valve assembly allows the receiver to be
located up to 100’ from the valve (available in standard 10’, 25’, 50’ and 100’ lengths).
Ideal for situations where the valve is located in hard to reach locations such as in risers,
ceilings, crawl spaces, etc.
The system can be performance tested anytime; it is resettable via reset button on
the receiver box. Optional dry contact connections (NO/C/NC) are available for fault
notication to existing security panel or BMS.
Emergency manual operation of the valve is accomplished by turning the knob on the top
of the actuator. In the event of a power failure, the valve will remain in position (either
open or closed).