Specifications

1
st
July 2021
Commercial in Confidence Contact FloodFlash - (888)-305-4345
2
Step by step guide:
1. Receive the Job from INC installs.
2. Review Installation Instructions (this document) and installation video
(vimeo.com/340951164)
3. Receive the sensor from INC installs.
4. Contact the installation contact specified in the documentation to confirm the
installation date & time.
5. Arrive on site.
6. Meet installation contact and ask them to specify the installation site.
7. Make sure the installation site meets the installation site requirements. (not
below ground level, not in a depression or drain, on the building outlined in
the documentation)
8. Ensure both top and bottom brackets can be installed properly on specified
wall (as below). If not, contact FloodFlash on (888)-305-4345
9. Drill 4 holes for the 2 brackets.
10. Install the device using the 2 provided brackets, 4 screws and wall plugs.
11. Take the 9 photos specified below and email them to INC installs.
12. Clear the site of waste/debris and take it away with you.
13. Thank the Customer for their time and leave site.
Installed FloodFlash sensor