Owner's Manual

Name and Contenct of Hazardous Substances
Plastic Shell PCB Cables Metal Parts Adapter
Electronic
Components
Rubber
Components
Content of Hazardous Substances
Component
Cadmium(Cd)
Lead(Pb)
Mercury(Hg)
Hexavalent Chromium
(CrVI)
Polybrominated
Biphenyls(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
Bis(2-ethylhexyl)
Phthalate(DEHP)
Butyl Benzyl
Phthalate (BBP)
Dibutyl Phthalate
(DBP)
Diisobutyl Phthalate
(DIBP)
O O O O O O O
O O O X O O O
O O O O O O O
O O O O O O O
O O O O O O O
O O O O O O O
O O O O O O O
O O O O O O O
O O O O O O O
O O O O O O O
The time of the components for environment protection concern is 10 years.
The time is valid under the use conditions of this manual.
16
FF:01
FF:02
FF:03
FF:05
FF:04
FF:06
FF:08
FF:09
FF:10
FF:12
FF:07
Over voltage in Charging.
Over current in Charging.
NTC Open-circuit/Short-circuit.
Internal cable disconnection of Battery Pack.
Battery voltage is too low.
Over voltage-differential in Battery.
Discharging temperature is too high.
Charging temperature is too high.
Charging temperature is too low.
Roller Brush Overcurrent.
The Dirty Water Tank is not installed.
Replace the Adatper.
Replace the Adatper.
Replace the Battery Pack.
Replace the Battery Pack.
Check the connection or replace the Battery Pack.
Replace Battery Pack.
Using the Cleaner when temperature gets normal.
Charging it when temperature gets normal.
Charging it when temperature gets normal.
Check and Clean the Roller Brush.
Install the Dirty Water Tank.
Possible Reasons Solutions
Error
Codes