Mamibot Multi-Surface Floor Cleaner FLOMO I USER MANUAL
Thanks for purchasing Mamibot Multi-Surface Floor Cleaner FLOMO. We hope FLOMO will bring you a smarter and more convenient lifestyle. If you encounter any problem not mentioned herein, please contact sales@mamibot.com. For more details, please visit our official website: Ma mib ot http://www.mamibot.com. Please read all instructions before using this product, and keep it properly for future reference.
Table of Contents 1 Safety Instructions 2 To Know Your Flomo 3 4 5 7 What’s in the Package? Specification Product View Digital Display 8 Operations 8 9 10 10 Assembly Filling up the Clean Water Tank Charging the Flomo Cleaning Floors with Flomo 12 Self-Cleaning 12 Care and Maintenance 14 Cleaning / Replacement Frequency Recommended 15 Trouble Shooting 16 Name and Content of Hazardous Substances 17 Recycling
Safety Instructions • This product is for home use. Please do not use it outdoors. • Do not disassemble,repair or refit Flomo I without authorization. • Do not modify or attempt to repair Flomo exept as indicated in the manual for use and care. • Do not use the product in an environment with risk of fire or explosion. • Do not use Flomo to pick up flammable materials, such as gasoline, lighter fluid. • Do not use Flomo to pick up toxic material. • Do not use Flomo to pick up foam liquids.
To KnowYour Flomo What’s in the Package? Handle Main Body Li-ion Battery Pack HEPA Cleaning Brush Hard Roller Brush (Optional Version) Charging Station Adapter Cleaning Tool & HEPA Cleaning Brush Drying Tray Hex Key USER MANUAL User Manual Accessories may be slightly different, the pictures are for reference, please subject to the actual received products or confirm with the seller.
Mam ibot Specification Product Model Flomo I Size of Main Unit 290*250*1150mm Net Weight 4.30KG Input 30V Power Consumption 150W Battery Type Li-ion Battery Battery Capacity 2600mAh Battery Voltage 25.2V Clean Water Tank Capacity 680 ml Dirty Water Tank Capacity 450 ml Working Time 24-28 mins Charging Time 3-4 hours Working Mode Eco Mode / Max Mode 0.8A ※ The data comes from the lab of Mamibot Manufacturing USA Inc.
Product View Switch Button Eco/Max Mode Spray Button Body Handle Self-Cleaning Button Clean Water Tank Ma mib Voice Switch (Optional Version) ot Digital Display Dirty Water Tank Release Button Dirty Water Tank Li-ion Battery Pack Brush Guard Mami bot Battery Pack Release Button Front View 4
Tube Tube Release Hole Holder Li-ion Battery Pack Battery Indicator DC Power Socket Back View Cap snuffle valve Clean Water Tank 5
Battery Slot Roller Brush Lock Infrared Sensor (Optional Version) Scroll Wheel UV-C Lamp (Optional Version) Scraper Small Scroll Wheel Brush Base Dring Tray DC Power Socket Charging Station 6
Digital Display The indicator will light up white when Flomo is in Eco Mode. The indicator will light up white when Flomo is in Max Mode. It shows the Working Time from “Switch on” to “now”. The indicator will light up white when UV lamp is working. The indicator will flash RED slowly when Clean Water Tank is short of water, please fill up with clean water. The indicator will flash RED slowly when Dirty Water Tank is full, please empty the Dirty Water Tank in time.
Operations Assembly 1. Take out the Handle,Main Body, Li-ion Battery Pack, Clean Water Tank, Dirty Water Tank Set, Roller Brush, Charging Station, Drying Tray, Cleaning Tool from the package. 2. Insert the Handle into Main Mody of Flomo until you hear a click. 3. Turn over the Clean Water Tank, insert it into the Main Body along the Clean Water Tank Slot until you hear a click. 4.
6. Insert the Roller Brush into the base of brush, rotate the Roller Brush so that the brush can align with the brush, meanwhile, make sure that the lock can align with the lockhole, then lock the Roller Brush. Filling up the Clean Water Tank 1. The cleaning water tank is located on the back of the main body, use your fingers to grab the top of the water tank and pull it upwards to remove. 2.
Charging the Flomo I 1. Insert the Drying Tray into the charging station as below. 2. Place the charging station against the wall at your convenience, plug the DC power socket of the adapter into the DC power socket of charging station, then plug the adapter into the outlet of electricty. 3. Charging: A). Place the Flomo on the charging station and plug the adapter, then start charging. B). Remove the Li-ion Batter Pack from the main body, and charge it directly.
2. Press the Switch Button on the Handle to turn on the Flomo. Press the Max Mode Button to switch the suction power. Switch Button Max Mode Spray Button ****** Important tips: • Please choose the Hard Roller Brush for areas with short rug if you ordered the Hard Roller Brush. • Please DO NOT use Flomo in the LONG rug areas. • Please DO NOT use Flomo in the delicate rugs, silk or similar floors. • Please DO NOT SPRAY on the rugs. 2.
Self-Cleaning Flomo can clean the roller brush and pipeline automatically on Self-Cleaning Base: 1). Please make sure there is enough clean water in the clean water tank , empty dirty water tank before self-cleaning. 2). Place Flomo on the charging station(1), plug in the power supply well. 3).
3. Dirty Water Cleaning 1). Press the Release Button of Dirty Water Tank, and take the Dirty Water Tank out. Take out the HEPA, the Cap, and the strainer, HEPA Filter Dirty Water Tank Cap Strainer 2). Pour the debris into the dustbin, pour the dirty water into wash basin. Clean the dirty water tank, the strainer and the cap, the HEPA with clean water. 4. Charging Station & Drying Tray Cleaning 1). Unplug the power supply and take the main body out before cleaning. 2).
5. Storage 1). Please dry the main body, clean water tank, dirty water tank, brush base, HEPA, Strainer, Charging Station, drying tray, then store them. 2). The roller brush can be stored in the drying tray. ******Notice: • The Dirty Water Tank must be cleaned and dried after each single cleaning to avoid mildew or smell. • The machine must be stored in a dry and ventilated place without heat sources. • Please keep the machine away from the direct sunlight.
Trouble Shooting Problems/Error Codes Possible Reasons Solutions • The power supply does not connect well. • Flomo is not connect well with charging station. • Please check the connection of power supply. • Please re-place Flomo on the charging station • The battery capacity is low. • The handle does not connect well. • Please check the battery capacity and charge it fully. • Please re-install the handle. • The Dirty Water Tank is full. • The Dirty Water Tank is not installed.
Error Codes Possible Reasons Solutions FF:01 Over voltage in Charging. Replace the Adatper. FF:02 Over current in Charging. Replace the Adatper. FF:03 NTC Open-circuit/Short-circuit. Replace the Battery Pack. FF:04 Internal cable disconnection of Battery Pack. Replace the Battery Pack. FF:05 Battery voltage is too low. FF:06 Over voltage-differential in Battery. FF:07 Discharging temperature is too high. FF:08 Charging temperature is too high. Charging it when temperature gets normal.
O: It indicates that the content of the hazardous substances in all homogeneous materials of the compoents is in compliance with the council RoHS 2 Directive (EU) 2015/863 and (EU) 2017/2102 amending Annex II to Directive 2011/65/EU.
