User's Guide

After five minutes, if you don’t get a green

CONNECTION light, you may have entered an

incorrect password. Press the WiFi button on the top

right of the Module and wait for the CONNECTION

light to blink red, close the app, reopen then restart

the process.

If the device fails to connect through the primary

method, you may be prompted to connect through a

"Legacy" method. Follow the prompts to open your

WiFi settings, connect to the FloLogic WiFi signal,

then return to the app to configure to the WiFi

network. Alternately the "Manual" method will ask for

the serial number on the CONNECT Module and

allow you to manually enter the SSID of the WiFi

network along with the password.

CONFIGURING THE CONNECT MODULE