SDS
Tank Mix w/ Bird Problem Additive Ready To Use Page 4 of 6
splash proof chemical goggles or a splash shield in accordance with 29 CFR 1910.133 is
recommended. Appropriate eye protection must be worn instead of, or in conjunction with, contact
lenses.
Skin Protection: As is a good practice with all materials, chemical resistant gloves, including
rubber, butyl, or neoprene, should be worn when working with the product to avoid skin contact.
Respiratory Protection: Not normally required. In situations where a risk of inhalation occurs, such
as where product is being misted, a respirator or air delivery system in accordance with 29 CFR
1910.134 (OSHA), 42 CFR 84 (NIOSH), and any other applicable regulations may be
recommended.
Other: Not generally required under normal working conditions. The end user must determine if the
process or methods involved required other personal protection clothing and/or equipment.
Work/Hygienic Practices: Do not consume food, drink, or smoke in areas where chemicals are
being stored or handled. After working with chemicals wash hands thoroughly before handling food
or beverages. Segregate and launder contaminated clothing before reuse.
Section 9: Physical and Chemical Properties
Appearance: Amber or Yellow Liquid
Odor: Mild
Odor threshold: Not tested
pH: 10.8 Typical
Melting point/freezing point: 25° F (- 4° C)
Initial boiling point and range: > 212° F
Flash Point: > 212° Fahrenheit – Tag Closed Cup
Evaporation Rate: Less than water
Flammability (solid, gas): Not applicable
Upper/lower flammability or explosive limits: Not tested
Vapor pressure: < 0.01 mm Hg estimated
Vapor Density: Heavier than air
Relative density: Specific Gravity (H
2
O = 1): 1.001 typical
Solubility (water): Dispersible
Partition coefficient: n-octanol/water: Not tested
Auto-ignition temperature: Not applicable
Decomposition temperature: Not applicable
Viscosity: Not tested
Stability: Stable
Percent Volatiles: Not tested
Section 10: Stability and Reactivity
Reactivity: Product is stable as delivered
Chemical Stability: Stable
Possibility of hazardous reactions: Heat may be generated in contact with strong oxidizers.
Conditions to avoid (e.g., static discharge, shock, or vibration): None known.
Incompatible materials: Avoid contact with strong oxidizers.
Hazardous decomposition products: Oxides of carbon.
Polymerization: Will not occur.