Manual

11
TOGGLE & CONTROL CENTER
TOGGLE & CONTROL CENTER
Toggle & Control Center Features (Within the PATCH APP 3.0 Software)
The PATCH XT Hardware will allow a user to redirect Inputs and/
or Outputs 1-2 from the rear side of the system to the front panel
for easy access and integration of outside analog audio
equipment.
This function can be engaged by clicking the “Front Inputs” or
“Front Outputs” toggle buttons located in the bottom section of
the software application. A prompt notification will alert the user
that the corresponding Inputs &/or Outputs will no longer be
actively functioning on the rear side of the PATCH XT Hardware
unit when the Front Inputs or Outputs are activated in the
application.
Note: Inputs 1-2, when redirected to the front panel Input
Connectors, will have the ability to have 48V Phantom Power
supplied to them when using the PATCH APP software controller.
FRONT PANEL INPUTS & OUTPUTS
Toggle Fro n t I n p u ts &
Outputs 1-2 rerouted from
rear connections to Front
Panel
PATCH
XT
MANUAL
PATCH XT OPTIONS
When a PATCH XT unit is connected to the user's computer, this
button will appear. When right-clicked, it will show two XT-specific
options: "Sleep/Wake Settings" and "Audio Detection".
SLEEP/WAKE SETTINGS
This feature lets the user choose a time interval after which PATCH
XT will automatically go to sleep if it doesn't receive any new
routing commands during that time. The default time interval is 8
hours.
AUDIO DETECTION
This feature launches a menu where the user can
choose a set of any eight corresponding input
channels (DB25/D-SUB) to monitor and confirm
incoming signals. The channel indicators will
illuminate when an audio signal is detected on the
specified channels.
Audio Detected Audio Not Detected