USER MANUAL V.1.0.
TABLE OF CONTENTS Cover...........................................................................................................................1 Table Of Contents.......................................................................................................2 Thank you from Flock Audio………………………………………………..……………..3 Introduction to the PATCH XT System..……………………..………………..………….4 Important Safety Notices…………….………………………..………………..………….5 What's in the Box...…….………………………..……………..………………..………….
THANK YOU Thank you… Where do I begin to start by saying Thank you for your support… I started working on a conceptual design known as “PATCH” in early 2016 when I decided to leave my stable career and chose to pursue the path less travelled of designing and developing a better & more efficient process for professional audio recording engineers in the depths of my basement home recording studio.
INTRODUCTION INTRODUCTION TO THE PATCHXT SYSTEM… The Flock Audio PATCH XT System is a digitally controlled, 100% analog audio patch bay routing system. A combination of Software known as the PATCH APP and a 192 Point Connection (96 Inputs & 96 Outputs) PATCH XT Hardware component allows users to easily route and control analog audio routings without having to resort to the use of manual patch cables. The PATCH APP software application (OSX & Windows compatible) is designed with familiarity in mind.
IMPORTANT SAFETY NOTICES IMPORTANT SAFETY NOTICES #1. Do Not Self-Service #4. Use Properly Grounded IEC Power Cables To avoid risk of electric shock, injury or death, it is recommended to never attempt to self-service a Flock Audio PATCH XT System. There are no self repairable or removable parts in the system. If your Flock Audio PATCH XT System requires repairs, please contact our support center to arrange for a Flock Audio Certified Repair Technician. (www.flockaudio.
WHAT'S IN THE BOX WHAT'S INCLUDED IN THE BOX PATCH XT 3U HARDWARE IEC POWER CABLE (110V or 220V) PATCHXT MANUAL USB-A TO USB-B (6FT LOCKING) 6 STEP QUICKSTART GUIDE 6 HARDWARE INDEX SETUP QR CODE WHATS IN THE BOX
FRONT PANEL Front Inputs 1-2 Neutrik XLR/TRS Combo Jacks (Activated using Software) FRONT INDENTIFICATIONS Blue LED Indicator (Learn more on Page 33) Power Toggle Button Front Outputs 1-2 Toggle On/Off Master Power Button Neutrik XLR Male Jacks (Activated using Software) PATCHXT MANUAL Multi-Purpose LED Indicator 7 FRONT PANEL INDENTIFICATIONS
REAR PANEL Ethernet Host Connector Long-Distance Host Cable for Long-Distance Computer Control REAR PANEL INDENTIFICATIONS USB-B Host Connector USB-B to USB-A Cable (Threaded locking USB 2.0 Connector) IEC Power Connection IMPORTANT: Always ensure that the Power Connector is inserted securely into the Power Input of the PATCH XT System Hardware. INPUTS Inputs & Outputs (1-2) Channels 1-2 can be routed to the Front Panel Inputs & Outputs using the PATCH APP Software.
REAR PANEL CABLE CONNECTIONS INPUTS & OUTPUTS NOTICE NOTE INPUTS & OUTPUTS ON THE REAR PANEL OF THE PATCH XT SYSTEM ARE SEPARATELY DESIGNATED. YOU CANNOT USE AN OUTPUT AS AN INPUT OR VICE VERSA. PLEASE ENSURE TO AVOID RISK OR DAMAGE TO THE PATCH SYSTEM OR OTHER EXTERNAL HARDWARE THAT IS C O N N E C T E D T H AT Y O U M A K E T H E P R O P E R CONNECTIONS ACCORDINGLY. TO LEARN MORE OF ABOUT PROPERLY CONNECTING EXTERNAL HARDWARE TO THE PATCH SYSTEM SEE THE BOTTOM OF THIS PAGE.
HARDWARE CHASSIS MEASUREMENTS CHASSIS DIMENSIONS 425 mm 16.75 in 323.9 mm 12.75 in 133.4 mm 5.25 in 482.6 mm 19 in 482.6 mm 19 in 25 lbs /11.3 kg (Weight) FRONT VIEW 323.9 mm 12.75 in 133.4 mm 5.25 in 425 mm 16.
TOGGLE & CONTROL CENTER Toggle & Control Center Features (Within the PATCH APP 3.0 Software) FRONT PANEL INPUTS & OUTPUTS The PATCH XT Hardware will allow a user to redirect Inputs and/ or Outputs 1-2 from the rear side of the system to the front panel for easy access and integration of outside analog audio equipment. This function can be engaged by clicking the “Front Inputs” or “Front Outputs” toggle buttons located in the bottom section of the software application.
ROUTING EXAMPLES Hardware & Software Routing Overview Standard Microphone Routing Example Mic The PATCH Series models are all a +4 Professional line level design. When connecting microphones directly to the PATCH Series hardware, standard audio engineering practices should be exercised such as the understanding that mixing signal levels may or may not exhibit audio level &/or electronic noise floor artifacts.
ROUTING EXAMPLES Hardware & Software Routing Overview Multing Routing Example Mic The PATCH Series models are all a +4 Professional line level design. When connecting microphones directly to the PATCH Series hardware, standard audio engineering practices should be exercised such as the understanding that mixing signal levels may or may not exhibit audio level &/or electronic noise floor artifacts.
ROUTING EXAMPLES Hardware & Software Routing Overview Mixing/Mastering Routing Example Interface (Output) Interface (Output) Compressor Compressor EQ EQ Saturation & Harmonics Saturation & Harmonics Interface (Input) Interface (Input) PATCHAPP MANUAL 14 ROUTING EXAMPLES
FRONT PANEL LED INDICATOR LED Indicator Legend - Solid Blue (Host Signal Text In PATCH APP) PATCHXT MANUAL 15 LED INDICATORS
INSTALLING NEW FIRMWARE How-to Install new PATCH Firmware NOTE: THIS PROCESS DOES NOT REFLECT SOFTWARE UPDATES. FIRMWARE UPDATES ARE EXPECTED TO BE RARE AND NOT REQUIRED OFTEN. Step by Step Install Process for New Firmware Perform the following steps to successfully update your system's firmware. Step #1. Download the latest available firmware from the “Downloads” tab at www.flockaudio.com Step #2.
INTRODUCING THE PATCH XT CABLE HANGER Introducing XTH Mounting Plate This is where the XTH Cable Hanger is mounted to the rear of PATCH XT. Cable Tie Holes Holes have been added in XTH's crossbars so the user can secure their cables to the crossbars with cable ties. (Cable ties not included) Crossbars DB25 cables will rest on these crossbars when they are connected to PATCH XT, relieving stress from the cables and the internal circuit boards inside the unit.
ASSEMBLING THE PATCH XT CABLE HANGER How To Assemble XTH PATCHXT MANUAL 18 ASSEMBLING THE XTH CABLE HANGER
TROUBLESHOOTING Troubleshooting Tips PATCH XT Unit doesn’t power on. PATCH XT Hardware & Software not communicating. - Confirm IEC power cable is securely inserted into your PATCH XT Confirm the “Rear White Switch” is in the ON Position and that the PATCH XT’s Toggle Switch Ring is Illuminated Solid Blue. Confirm that wall power source is working by plugging in another device.
SOFTWARE & SYSTEM REQUIREMENTS Software Compatibility & System Requirements OSX: 10.12 Sierra or Newer Disk Space: Minimum 512 MB available disk space USB: 1x USB 2.0/3.0 Port (Per PATCH Series System) Required USB bandwidth: 5%-10% Memory(RAM): 4GB Minimum (8GB or more recommended) CPU: Intel Core 2 Duo (Minimum) Intel Core i3 ™ or higher (Recommended) Internet Connection: Internet Connection is required for download and updates.
USER NOTICES & WARRANTY User Notices & Warranty WARRANTY REPAIRS Depending on the warranty service chosen by the user at the time of purchase, the Flock Audio Support Warranty Programs will differ as per below. PLEASE NOTE: IN ORDER TO PROCESS WARRANTY CLAIMS If you are having trouble with your PATCH XT System and troubleshooting suggestions did not work, please visit (www.flockaudio.com/support) for further details & to contact our Technical Support team.
www.flockaudio.com PATENT PENDING © 2022 Flock Audio Inc.
