Manual

ManualsBrandsFlock Audio ManualsAncillary Studio & Broadcast ProductsPatch LT - 32 Point, digitally controlled, analogue audio patch bay routing system

USER MANUAL

V.1.0.2

Summary of content (20 pages)

PAGE 1
USER MANUAL V.1.0.
PAGE 2
TABLE OF CONTENTS Cover...........................................................................................................................1 Table of Contents........................................................................................................2 Thank you from Flock Audio………………………………………………..……………..3 Introduction to the PATCH LT System………………………..………………..………….4 Important Safety Notices…………….………………………..………………..………….5 What's in the Box...…….………………………..……………..………………..………….
PAGE 3
THANK YOU Thank you… Where do I begin to start by saying Thank you for your support… I started working on a conceptual design known as “PATCH” in early 2016 when I decided to leave my stable career and chose to pursue the path less travelled of designing and developing a better & more efficient process for professional audio recording engineers in the depths of my basement home recording studio.
PAGE 4
INTRODUCTION INTRODUCTION TO THE PATCH LT SYSTEM… The Flock Audio PATCH LT System is a digitally controlled, 100% analog audio patch bay routing system. A combination of software known as the PATCH APP and a 32 Point connection hardware component allows users to easily route and control analog audio routings without having to resort to the use of manual patch cables. The PATCH APP software application (OSX & Windows Compatible) is designed with familiarity in mind.
PAGE 5
IMPORTANT SAFETY NOTICES IMPORTANT SAFETY NOTICES #1. Do Not Self-Service #5. Use Properly Grounded IEC Power Cables To avoid risk of electric shock, injury or death, it is recommended to never attempt to self-service a Flock Audio PATCH LT System. There are no self repairable or removable parts in the system. If your Flock Audio PATCH LT System requires repairs, please contact our support team to arrange for a Flock Audio Certified Repair Technician. (www.flockaudio.
PAGE 6
WHAT'S IN THE BOX WHAT'S INCLUDED IN THE BOX PATCH LT 1U HARDWARE IEC POWER CABLE (110V or 220V) PATCHlt MANUAL 65W POWER SUPPLY USB-A TO USB-B (10FT) 6 6-STEP QUICKSTART GUIDE HARDWARE INDEX SETUP SHEET WHAT'S IN THE BOX
PAGE 7
FRONT PANEL FRONT PANEL INDENTIFICATIONS Front Input 16 Neutrik XLR/TRS Combo Jack (Activated using Software) Power LED Indicator Blue LED Power Indicator Power Toggle Switch Front Output 16 Toggle On/Off Master Power Switch Neutrik XLR Male Jack (Activated using Software) PATCHlt MANUAL 7 FRONT PANEL IDENTIFICATIONS
PAGE 8
REAR PANEL REAR INDENTIFICATIONS USB-B Host Connector USB-B to USB-A Cable (USB 2.0 Connection) Rear Inputs 1-16 DB-25/D-SUB Connectors Inputs: 1-8 & 9-16 (8 Balanced Audio Channels per Connector) Tascam 25 Pinout Wiring Standard 65W Power Connection 6 Pin Connector with threaded locking sleeve IMPORTANT: Always ensure that the Power Connector is fastened tightly into the Power Input of the PATCH LT System Hardware.
PAGE 9
REAR PANEL CABLE CONNECTIONS ATTENTION: INPUTS & OUTPUTS NOTICE NOTE INPUTS & OUTPUTS ON THE REAR PANEL OF THE PATCH LT SYSTEM ARE SEPARATELY DESIGNATED. YOU CANNOT USE AN OUTPUT AS AN INPUT OR VICE VERSA. PLEASE ENSURE TO AVOID RISK OR DAMAGE TO THE PATCH SYSTEM OR OTHER EXTERNAL HARDWARE THAT IS CONNECTED THAT YOU MAKE THE PROPER CONNECTIONS ACCORDINGLY. TO LEARN MORE OF ABOUT PROPERLY CONNECTING EXTERNAL HARDWARE TO THE PATCH LT SYSTEM, SEE THE BOTTOM OF THIS PAGE.
PAGE 10
HARDWARE CHASSIS MEASUREMENTS CHASSIS DIMENSIONS 431.8 mm 227.4 mm 43.8 mm 482.0 mm FRONT VIEW 3 Kg (Weight) 482.0 mm 43.8 mm 431.
PAGE 11
ROUTING EXAMPLES Hardware & Software Routing Overview Standard Microphone Routing Example Mic The PATCH Series models are all a +4 Professional line level design. When connecting microphones directly to the PATCH Series hardware, standard audio engineering practices should be exercised such as the understanding that mixing signal levels may or may not exhibit audio level &/or electronic noise floor artifacts.
PAGE 12
ROUTING EXAMPLES Hardware & Software Routing Overview Multing Routing Example Mic The PATCH Series models are all a +4 Professional line level design. When connecting microphones directly to the PATCH Series hardware, standard audio engineering practices should be exercised such as the understanding that mixing signal levels may or may not exhibit audio level &/or electronic noise floor artifacts.
PAGE 13
ROUTING EXAMPLES Hardware & Software Routing Overview Mixing/Mastering Routing Example Interface (Output) Interface (Output) Compressor Compressor EQ EQ Saturation & Harmonics Saturation & Harmonics Interface (Input) Interface (Input) PATCHlt MANUAL 13 ROUTING EXAMPLES
PAGE 14
FRONT INPUTS & OUTPUTS Front I/O Features FRONT PANEL INPUTS & OUTPUTS The PATCH LT System Hardware will allow a user to redirect Input 16 and/or Output 16 from the rear side of the system to the front panel for easy access and integration of outside analog audio equipment. This function can be engaged by clicking the “Front Inputs” or “Front Outputs” toggle buttons located in the bottom section of the software application.
PAGE 15
MULTIPLE UNIT SETUP MULTIPLE UNIT ANALOG CONNECTIONS Multiple PATCH System Setup When connecting multiple hardware units together for MultiUnit configurations, a user must choose which connections to configure in order to send &/or receive analog audio signals between multiple PATCH LT Hardware Units. As shown in the example to the right, 2 PATCH LT Hardware Units are connected with 8 Sends and 8 Returns.
PAGE 16
INSTALLING NEW FIRMWARE How-to Install new PATCH LT Firmware NOTE: THIS PROCESS DOES NOT REFLECT SOFTWARE UPDATES. FIRMWARE UPDATES ARE EXPECTED TO BE RARE AND NOT REQUIRED OFTEN. Reset Bootload Step by Step Installation Process for New Firmware In order to properly install new available Firmware onto the Flock Audio PATCH LT System Hardware, you will require access to the top side of the hardware unit. Located on the top lid on the right hand facing side there are 2 small holes in the chassis lid.
PAGE 17
TROUBLESHOOTING Troubleshooting Tips PATCH Unit doesn’t power on. PATCH Hardware & Software not communicating. - Confirm 24VDC Power supply pin insertion is properly connected and threaded locking sleeve is hand tightened. Confirm front panel rocker switch is pushed in upwards position showing vertical line “|” icon & blue LED power indicator is illuminated. Confirm that wall power source is working by plugging in another device.
PAGE 18
SOFTWARE & SYSTEM REQUIREMENTS Software Compatibility & System Requirements OSX: 10.12 Sierra or Newer Disk Space: Minimum 512 MB available disk space USB: 1x USB 2.0/3.0 Port (Per PATCH System) Required USB bandwidth: 5%-10% Memory(RAM): 4GB Minimum (8GB or more recommended) CPU: Intel Core 2 Duo (Minimum) Intel Core i3 ™ or higher (Recommended) Internet Connection: Internet Connection is required for download and updates.
PAGE 19
USER NOTICES & WARRANTY User Notices & Warranty WARRANTY REPAIRS Depending on the warranty service chosen by the user at the time of purchase, the Flock Audio Support Warranty Programs will differ as per below. PLEASE NOTE: IN ORDER TO PROCESS WARRANTY CLAIMS If you are having trouble with your PATCH LT System and troubleshooting suggestions did not work, please visit (www.flockaudio.com/support) for further details & to contact our Technical Support Team.