Manual

9
REAR PANEL CABLE CONNECTIONSPATCH MANUAL
REAR PANEL CABLE CONNECTIONS
24VDC Power Supply (6 Pin)
(Included In Box)
USB-A To USB-B (Cable)
(10’ USB 2.0 - Cable Included In Box)
(Cable examples courtesy of Pro Audio LA)
DB-25/D-SUB Cable Snakes
(Female/Male XLR & TRS Options Available)
(Cables Not Included)
REAR VIEW
REQUIRED CABLES FOR OPERATION
ATTENTION:
INPUTS
OUTPUTS
NOTE THAT THE DB-25 CONNECTORS ON THE REAR PANEL
ARE ALTERNATE ORIENTATIONS. DO NOT TRY TO FORCE THE
DB-25 CONNECTOR TO CONNECT IF IT'S NOT EASILY
CONNECTING. REVIEW ORIENTATION, THEN TRY AGAIN.
NOTE INPUTS & OUTPUTS ON THE REAR PANEL OF THE
PATCH SYSTEM ARE SEPARATELY DESIGNATED. YOU
CANNOT USE AN OUTPUT AS AN INPUT OR VICE VERSA.
PLEASE ENSURE TO AVOID RISK OR DAMAGE TO THE
PATCH SYSTEM OR OTHER EXTERNAL HARDWARE THAT
IS CONNECTED THAT YOU MAKE THE PROPER
CONNECTIONS ACCORDINGLY. TO LEARN MORE ABOUT
PROPERLY CONNECTING EXTERNAL HARDWARE TO THE
PATCH SYSTEM SEE THE BOTTOM OF THIS PAGE.
INPUTS & OUTPUTS NOTICE
OUTPUT
INPUT
OUTPUTS
INPUTS
(OUTPUT) FROM PATCH TO
(INPUT) OF EXTERNAL GEAR
(OUTPUT) FROM EXTERNAL
GEAR TO (INPUT) OF PATCH
CONNECTING
PATCH TO EXTERNAL
HARDWARE EXAMPLE.
NOTE ALL EXTERNAL HARDWARE MUST BE
CONNECTED IN THIS METHOD, SHOWN TO
THE LEFT SIDE OF THIS DESCRIPTION.
PATCH (OUT) —-> EXTERNAL HARDWARE (IN)
EXTERNAL HARDWARE (OUT) —-> PATCH (IN)
EXTERNAL
HARDWARE