Operating Instructions

3. Blast with a jet of water from garden hose nozzle, from different directions,

most of the remainder of residues,

slide the spring up and down,

hile making contact with the center electrode from various directions.

are metal, although the

spring is relatively easy to clean completely. If the majority of the scale is

icient

Because the mesh is very fine, deposits can slowly choke the

of vinegar until visually free of blue / white scale

buildup,

cid to 2/3 water and place screen

to a jar containing this mixture. The cleaning process will take a minute

NOTES

The dilute acid dip can also be used e electrodes. Place the unit on top

of the jar with the electrodes immersed, and remove when the bubbling action

to knock off loose material and scale.

4. Reduce the water flow, and with water running over the electrodes, attack

buildup with cleaning brush to remove

AND / OR

With water running over the electrodes,

The residues will wash away with the water.

The center electrode need not be cleaned down to b

removed, the floatron will perform satisfactorily. It is not possible to clean the

electrodes too much or too often. The cleaner the electrodes, the more eff

the operation.

Occasionally, the screen will require cleaning to ensure a free flow of water and

ion exchange.

openings in the screen and restrict water flow. To clean the white mesh screen:

1. Hose out loose debris.

2. Immerse screen in a jar

Mix about 1/3 muratic / hydrochloric a

or less. Do not expose screen to the acid mix for more than a minute or

as it could soften the plastic.

3. Rinse screen and reinstall.

to clean th

ceases. Do not leave electrodes submerged for more than a few minutes. Rinse

and reinstall screen.