Cut Sheet

CoRe+
TM
Technical specications
Aluminum casing
NEMA 4X
Charging connector
SAE J1772
Cable
7.62 m / 25' Ultra Flex
Electrical load
Standard: 30 A @ 208 VAC or 240VAC for each charging station
Power Sharing: 32 A @ 208 VAC or 240 VAC per set of 4 charging stations
Charging power
1.2 kW to 7.2 kW (maximum congurable by software)
Output current
6 A to 30 A (maximum congurable by software)
Integrated GFCI
20 mA, auto reset (3 attempts at 15-minute intervals)
Frequency
60 Hz
Operating and storage
temperature
-40 °C to 50 °C / -40 °F to 122 °F
Weight
Charging station: 9.5 kg / 21 lb
Pedestal: 14.5 kg / 32 lb
Humidity
Up to 95% (non-condensing)
Card reader
ISO 14443 A/B, ISO 15693, NFC
Communication interface
ZigBee - IEEE 802.15.4 meshed network
Networking
Cellular – 3G (gateway is installed separately for optimal performances)
Certications
CSA certied for Canada and United States
Complies with UL 2594, UL 2231-1, UL 2231-2
EMC compliance
USA - FCC 47 CFR 15, class A
CAN - ICES-3 (A) / NMB-3 (A)
FLO.TS.CORE+.CA.04.2019.v2 © 2019 Services FLO Inc. All Rights Reserved. Services FLO Inc reserves the right to alter product offerings and specications at any time without notice and is not responsible for typographical or graphical errors that may appear in this document. All pictures shown are for illustration purposes only. Actual product may vary due to product enhancements.
Learn more
[e-mail]
1 855 543-8356
flo.ca/products
Designed and manufactured
by AddÉnergie
Made in
Canada