FT Tiny Trainer Assembly Guide

63
COMPLETE YOUR CHUCK GLIDER
1. Take the Trainer/Free Flight Wing, and place it on top of the body, lining it up
against the hatch.
2. Use Rubber Bands to wrap around the Skewers and over the wing until it is
secured (Illustration 1).
3. Put your fingers on the marks, balancing the plane. Let the plane move
naturally.
4. You want it to be a touch nose heavy, so add craft clay into the nose until the
plane balances (Illustration 2).
THE BUILD
ATTACH WINGS & CHECK CG (CHUCK GLIDER)