FT Tiny Trainer Assembly Guide

INSERT YOUR BATTERY

1. Place Velcro on your Battery (Illustration 24).

2. Connect the Battery to the ESC. You should hear a series of beeps from your

Transmitter, indicating that it’s calibrated.

3. Velcro the Battery on top of the Power Pod (Illustration 25).

4. Grab your Transmitter to test if all the controls are going the right way. Make

sure you keep the left throttle all the way down, and remove your prop.

5. When you push to the right, the Rudder should go to the right. If it’s backwards,

reprogram the controller.

6. Go to your Servo settings, and click the Elevator, Rudder or aileron. Then

hit enter, and switch the controls. This should program it so that everything

operates correctly.

THE BUILD POWER POD & ELECTRONICS