FT Tiny Trainer Assembly Guide

55
BIND YOUR RECEIVER TO YOUR TRANSMITTER
1. Set your completed Power Pod aside, and grab your Receiver and Transmitter
(Illustration 11).
2. Insert your bind plug into the Battery Bind channel on your Receiver.
3. Insert your ESC signal wire into the throttle channel.
4. Hook up your Battery to the other end of your ESC signal wire.
5. A light on the Receiver should now be flashing (Illustration 12).
6. Hold down the trainer switch on your Transmitter. Keeping your throttle closed
(with the stick all the way back), turn on your Transmitter while holding onto the
trainer switch.
7. When the Transmitter stops flashing, and the Receiver has a solid light
(Illustration 13), they are bound.
8. Remove the bind plug from the Receiver, unplug the Battery and turn off
your Transmitter.
THE BUILD POWER POD & ELECTRONICS