FT Tiny Trainer Assembly Guide

51
REINFORCE YOUR ADVANCED WING
1. Cut another piece of your Skewer so that it’s slightly smaller than the space
between the two ailerons. Always remove the pointy end of Skewer.
2. Cut the portion of tape on the foam along the trailing edge (Illustration 38).
3. Bend a small crack in the middle of the Skewer so that it matches the shape of
the wing, and then glue the Skewer to the foam (Illustration 39).
4. Use a scrap piece of foam to remove excess glue, then cover it with a piece
of tape.
5. Take your Y Lead, and attach to the Servo extensions (Illustration 40).
THE BUILD ADVANCED WING