FT Tiny Trainer Assembly Guide

50
ATTACH CONTROL HORNS TO YOUR ADVANCED WING
1. Pop out two more Control Horns.
2. Press one Control Horn into the slot on the one of the ailerons (Illustration 36).
Ensure it has a free range of motion.
3. Remove the Control Horn, and slide the Z-bend of your Push Rod into the hole,
keeping the Z-bend on the inside of the Control Horn.
4. Insert the Push Rod into the Linkage Stopper on your Servo (Illustration 37).
5. Glue the Control Horn into place.
6. Let thoroughly dry.
7. Use Wire Cutters to remove the excess wire.
8. Center your Servo, and then tighten the Linkage Stopper.
9. Repeat the process on the other aileron.
THE BUILD ADVANCED WING