FT Tiny Trainer Assembly Guide

44
THE BUILD ADVANCED WING
ADD DIHEDRAL
1. Use your Knife to slice the seam in the wing area (Illustration 16).
2. The wing should now bend freely (Illustration 17).
3. Use your dihedral gauge to hold up the wing (Illustration 18).
4. Put glue in the crack (Illustration 19), and prop the wing up on the dihedral
gauge.
5. Take a scrap piece of foam to smooth out the glue, and put some weight on it
so that it dries evenly (Illustration 20).
6. Give it 4 minutes to dry.
7. When it’s dry, put some tape on top of the glue, folding it around to the bottom.
8. Repeat the dihedral process on the other side.