FT Tiny Trainer Assembly Guide

43
THE BUILD ADVANCED WING
GLUE YOUR ADVANCED WING TOGETHER
1. Take your Knife, and remove the hole at the top (Illustration 11).
2. Fold the wing over, and hold it down.
3. Place glue along the two main score marks (Illustration 12). Have an extra hot
glue stick handy in case you run out of glue during this step.
4. Fold the wing over, and hold until dry, maintaining the wing shape.
5. Once that dries, put glue on your Double Bevel (Illustration 13) and on the
spars (Illustration 14).
6. Fold over, and hold until dry.
7. Put a bead of glue on the rear seam (Illustration 15).
8. Hold it as it’s upside down until dry.