FT Tiny Trainer Assembly Guide

42
THE BUILD ADVANCED WING
CREATE YOUR ADVANCED WING SHAPE
1. Take the first spar, and glue it down, lining it up right at the edge of the seam
line (Illustration 7).
2. Hold until dry.
3. Repeat the process on the other side.
4. Grab a small spar, and line it up next to the etch marks (Illustration 8).
5. Glue it down, and then put another small spar on the other side of the etch
marks (Illustration 9).
6. Hold until dry.
7. Repeat on the other side (Illustration 10).