FT Tiny Trainer Assembly Guide

THE BUILD TRAINER/FREE FLIGHT WING

ADD DIHEDRAL

1. Using your Knife, cut out the score marks on the top of the wing for the

polyhedral (Illustration 14).

2. Once it’s cut and the foam has been removed, you should be able to lift the

wing tip up (Illustration 15).

3. Use your dihedral gauge to hold up the wing tip (Illustration 16).

4. Put glue in the crack (Illustration 17), and prop the wing up on the dihedral

gauge.

5. Take a scrap piece of foam to smooth out the glue, and put some weight on it

so that it dries evenly (Illustration 18).

6. Give it 4 minutes to dry.

7. While it’s drying, set some tape on top of the glue, folding it around to the

bottom.

8. Repeat the process on the other side of the wing.