FT Tiny Trainer Assembly Guide

36
THE BUILD TRAINER/FREE FLIGHT WING
CREATE YOUR TRAINER WING SHAPE
1. Fold the wing over, and hold it flat (Illustration 7).
2. Take the main spar, and line it up inside the etch lines (Illustration 8).
3. Glue the main spar down, lining it up right at the edge of the seam line
(Illustration 9).
4. Hold until dry.
5. Repeat the process with the two smaller spars, gluing them inside the
corresponding etch marks (Illustration 10).
6. Hold until dry.