FT Tiny Trainer Assembly Guide

32
THE BUILD POWER NOSE
ATTACH YOUR POWER NOSE TO YOUR FUSELAGE
1. Slide the nose into the Fuselage (Illustration 5).
2. The holes on the sides of the nose should line up. Take your Barbecue Skewer,
and puncture the holes using the pointy end (Illustration 6).
3. Pass the Skewer through the holes completely.
4. Leave a half inch of Skewer on either side.
5. Remove the Skewer, and use your Knife to cut it, rolling the Skewer underneath
your Knife and pulling it apart (Illustration 7).
6. Use your first cut Skewer to measure another piece of equal length.
7. Place the cut Skewers back in the holes to secure the nose to the Fuselage
(Illustration 8).