Manualshelf

FT Tiny Trainer Assembly Guide

ManualsBrandsFlite Test ManualsAirplanesMighty Mini Tiny Trainer Speed Build Electric Airplane Kit (940mm)
31323334353637383940
31
THE BUILD POWER NOSE
ATTACH YOUR DOUBLERS
1. Grab your doublers, and do a dry fit (Illustration 3).
2. Glue them in one at a time. Slide it around a little to spread the glue around the
entire doubler, and then make sure the edges line up as close as possible.
3. Keep pushing down on the doubler until it’s completely dry.
4. Once both doublers are dry, use glue to reinforce them (Illustration 4),
smearing the glue with a scratch piece of foam.