FT Tiny Trainer Assembly Guide
30
PREPARE THE FOAM PIECES OF YOUR POWER NOSE
1. Pop out the Power Nose body and doubler pieces.
2. Use your Knife to score cut as close to the paper as possible, and remove the
excess foam with your fingers and your Knife.
3. Do your B Fold test fit, then glue the foam side, rotate the side up and hold to
dry (Illustration 1).
4. Use your Drafting Triangle to ensure it’s at a 90°angle (Illustration 1a).
5. Repeat for other side.
6. Put glue along the foam of the top piece, and then fold over.
7. Press against the table and hold until dry (Illustration 2).
THE BUILD
POWER NOSE