FT Tiny Trainer Assembly Guide

THE BUILD GLIDER NOSE

ATTACH TAB TO GLIDER NOSE

1. Pop out the tab, and slide it into the hole in the hatch (Illustration 10).

2. Slide the Fuselage into the Glider Nose (Illustration 11).

3. The holes on the sides of the nose should line up.

4. Take your Barbecue Skewer, and puncture the holes using the pointy end

(Illustration 12).

5. Pass the Skewer through the holes completely.

6. Leave a half inch of Skewer on either side (Illustration 13).