Manualshelf

FT Tiny Trainer Assembly Guide

ManualsBrandsFlite Test ManualsAirplanesMighty Mini Tiny Trainer Speed Build Electric Airplane Kit (940mm)
21222324252627282930
22
THE BUILD FUSELAGE
READY YOUR SERVOS AND CONTROL HORNS
1. Repeat the process for the other Servo.
2. Grab a Servo and a control arm.
3. Take the plastic control arm, and cut the two outer holes, leaving only the inner
hole (Illustration 28).
4. Using a small screw, attach the Control Horn to the Servo.
5. Repeat the process with the other Servo.
6. Remove the stickers from the sides of the Servos, and use either your
Sandpaper or Small Knife to rough up the sides. This will give the glue
something to stick to.